Lcd display unit on the R 300 epson printer not working
Ther is no display on the dispaly unit on the R300 epson printer , so i thought it must have gone faulty, i have tried to get information on the R300 but without joy,i was told to try a method which was to hold down three buttons on the printer at the same time for ten seconds. i did this and got a message on the display unit saying the following, clear waste ink ctr, turn off the printer power. i did this but when i turned the power back on ,no display on the unit, dose this mean the unit is no longer of any use or can i fix the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Is your Epson printer new? If so you would have got a CD. Why not try the CD. If not you could try any Epson near R300 series. It might work or sometime it may detect by itself and connect your printer to the computer.
I apologize for a delayed response as i was not at my desk.
I am sorry to hear regarding the problem.Unfortunately, this is a common problem on this printer.There is only one reset procedure that might work. Press and hold the ' Stop ', 'Maintenance ' and ' Power ' buttons for about 10 seconds.Then turn the printer off, and back on.
Note - You still need to get the ink absorber changed.
The repair is not economical as Epson would charge anywhere between $100 - $300 for repair. You could look for the below procedure to DIY :
I have put aPDF files on my website for you to download.
And it for your printer Epson-R300-Manual.pdf Just click on the links it will download for you. It got all you need to know in this file. You can read it on site and save it to your PC. Click LINK= http://www.4all2sell.com/pdf/Epson-R300-Manual.pdf You need a adobe reader to see this file If you not got a pdf reader you can download it off this link free. http://www.adobe.com/products/reader/ Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
This is already a hardware issue if that is the case. You can get some info of your local epson servicer near your area through the epson website, support.epson.com and browse for your printer. If you are having problems the contact epson technical support @ 562-276-1300.