Unlock code i got a kenwood dvd car stereo and i lost the security code

1. If your car battery died, your Kenwood stereo will ask you for a code. There are various ways to enter the security code; this depends on the model of your Kenwood stereo.
2. Look in your manual and see what the security code is for your particular Kenwood stereo. There are common security codes on many Kenwood stereos. Kenwood claims security, but its stereos have many of the same security codes. Here are three common security codes: 1-2-3-4 (a code many Kenwood owners use), 3-0-5-1 (a common security code in Kenwood manuals) and KCAR (works on some Kenwood stereo models). You should have a code within the pages of your manual. Luckily, many Kenwood stereos have the same security codes.
3. Enter the security code into your Kenwood radio. Method #1: During the code request mode, while holding the DISP key depressed, press and hold the "Volume UP" or "DOWN" key for three seconds until the " ... " display disappears. Enter the security code using your Kenwood remote. Method #2: Press the "Auto" and "Track Up" button on the face of radio at the same time until the four dash lines disappear. Enter the security code using your Kenwood remote. Method #3: Press and hold the "One" then the "Six" preset keys until the display shows the letter "C." Enter the security code using your Kenwood remote.
4. Tips:

• If you did not have your manual, try the most common codes for Kenwood stereos. If those codes don't work, you can also buy your Kenwood stereo code online. There are places online that will sell you the security code to your Kenwood stereo.
• Keep your security code and this information in a safe place.

Here is a link to a more detailed site Good Luck

If you need further help, reach me via phone at https://www.6ya.com/expert/richard_b70d968cd1a1d293

Here's a video tank daWG suggested as a solution to your problem from YouTube:


how to unlock code kenwood stereo.3gp

U have to have remote I just fix mine kenwood company was no help they want to charge when they could just tell u what to do but hit me up if u want to fix

Sorry...KENWOOD codes are only available from the Main Dealer or a Radio Decoding Service

kenwood 7018 car stereo wont play when code is put in

There is a chip inside the radio. It can be replaced with another to clear out the code. It must be sent to the shop for this.

for your kdc-mp528 will work whith code KCAR entered from the remote

Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press and hold the "Auto" button and "Track up" (next track button on the right) on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

i hope this works for you.

I read a blog on your site about Kenwood stereo's. I used that information to unlock my stereo security code. Albiet, I did have to figure out a bit of the code needed myself. I am again able to listen to music on my stereo.

NEED TO GET THE FLEXIBLE RIBBON CABLE PART NUMBER FOR KENWOOD MODEL # DPX5200M

Kenwood Stereos do not have 5 digit codes. They are only a 4 digit code.