Question about Irons

1 Answer

Rowenta Dz9080 Rowenta iron dz9080 won't turn on

Posted by barry on

Ad

1 Answer

Pete Peters

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Check or replace fuse in plug. If that don't do it, then change fuse inside iron. Make sure iron is not plugged to supply.

Posted on May 09, 2013

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Rowenta iron manual needed

does not heat but indicator light is on.
Rowenta steam Iron Model DE-871

Posted on Dec 26, 2008

Ad

David Shaub

  • 2976 Answers

SOURCE: Iron spits out rusty water. The iron is a Rowenta

Fill it with a mix of 50% white vinegar and 50% water. Let it set for 30 minutes and steam it out for about 2 minutes. Unplug it and dump it. After it cools colpletely, fill it with water and steam it out. The rust is coming from your water supply, not the iron.

Posted on Oct 06, 2009

wfservices

Wayne Fellows

  • 262 Answers

SOURCE: I want to know how to clean my Rowenta Advancer

You can use ordinary white vinegar. Use about 1/4 cup or so mixed with 2 cups water. Fill iron with this solution and operate it at full steam setting(high as possible) Set a folded towel(may want to use an old one)iron on the towel and operate the steam device until all the liquid is gone. This may clear some of the scale build up. There are Generic brands available at the stores made especially for irons, but vinegar is the most enviro friendly and is cheap.

Posted on Feb 21, 2010

nitrospawn

Ibe Chukwudi

  • 290 Answers

SOURCE: rowenta DZ9080 iron yellow light flashes but iron

it is possible that there is a loss in contact in the iron you will need a local repairs man to do that for you

Posted on Apr 28, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: I have a rowenta advancer DZ9080 iron that the

Hi,

Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it.

Electric Iron not Heating Up or not Working Right
http://www.fixya.com/support/r5300202-electric_iron_not_heating_up_or_not

heatman101

Posted on Jul 14, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the circuit board for a Rowenta steam iron Model DW2070


I tried to take apart a rowenta for my neighbor-Basically it is GLUED TOGETHER and is basically non repairable unless returned to vendor who repairs tge ho get them reglued! Weird!!!!!

May 23, 2014 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Iron heating sporadically and sensor lights working sporadically


It looks like the cord has a loose connection and will need to be replace.

Mar 29, 2008 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Iron heating sporadically and sensor lights working sporadically


sounds like a loose connection in the power transfer, some piece of metal may be broken or the cord itself may be damaged in some place, you could try replacing the cord. I would just go and buy a new iron. They aren't all that expensive anymore. Good luck with whatever you decide to do. I hope you solve your problem. If you want any further help or have any other questions, please let me know, otherwise have a Good Day.

Mar 29, 2008 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

I need the printed circuit board for a Rowenta steam iron Model DZ9080


There is pcb manufacturer RayMing, you may visit it https://www.raypcb.com/ and to choose your specific PCB

Jul 26, 2012 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Lights come on but it don't heat up..


Sounds like a defective thermofuse. Rowenta doesn't encourage anyone to repair their product except their authorized service centers. Parts are not made available. Go to rowenta.com to find the nearest service center and call them.

Nov 07, 2010 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Only the green light lights up, dz9080 rowenta advancer iron


A small amount of White vinegar or some diluted dishwasher scale cleaner (calgon) added to the steam water then run it on steam setting ironing some waste fabric untill spotless.

Aug 01, 2010 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

My DZ9080 does not heat up. The lights come on.


If it does not heat up but lights is on, the reason being is the connection to the heaters is open or disconnected. It might be due to rust(water seepage) or overheat issues. Why the light is still on, its because the tap the supply to the led before the connections to the heaters. Try dismantling it to check the connection but most irons now is difficult to dismanlte without breaking something

Jun 10, 2010 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Rowenta DZ9080 iron yellow light flashes but iron doesn't get hot


it is possible that there is a loss in contact in the iron you will need a local repairs man to do that for you

Apr 27, 2010 | Rowenta DZ9080 Iron with Auto Shut-off

1 Answer

Need to know how to clean a rowenta iron plate


As long as it's not a coated surface - plain steel - get 0000 steelwool to rub it with. It will take some elbow grease but it will work to clean and (almost) polish the surface.

Mar 26, 2009 | Rowenta DZ9080 Iron with Auto Shut-off

Not finding what you are looking for?
Irons Logo

Related Topics:

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irons Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18455 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34586 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...