How to Copy my files from my L6 cell to computer?

Plug your phone your PC via the data link cable (USB) and use Windows Explorer (in a PC) or a file explorer/manager on your phone to copy and paste the file that you want and put them in the phone folder of your choice.

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Windows Photo Gallery or Picasa.

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as the free Picasa program ( http://picasa.google.com ).

Hi
you may face this issue because of differences between mac and windows file systems/partition table and security attributes that may disallow any further changes.

1-try to connect you HDD to a windows Computer and Backup all your files before loses any data(use more newer version of windows like windows 10 build 1709 windows XP is old/out of services and has many problems)
2-after a full backup in windows try to connect your HDD to your mac and format it via your MacBook
3- after formatting your HDD try to reconnect your HDD to windows and copy your files to HDD(windows has a compatible file systems that could read/allow/write mac file systems/partition and its attributes)

4-enjoy

best regard

Windows Motorola L6 Mobile Phone USB Driver. Select the correct driver for your computer's operating system:

• Download 32-bit version of Windows 2000, XP or Vista USB Driver

• Download 64-bit version of Windows XP or Vista USB driver

It’s not advisable for using this driver for data or file transfers. Instead, use the Motorola Phone Tool software.

Click here for Installation Instructions.

If you found this information helpful, please give me a big thumbs up when you rate my answer.

first check ur usb port that is it ok? sometimes some usb has problem when it become old. then check ur usb cable is that ok? if everything are ok then format ur pc and install usb 2 software for ur usb system. thanks

You can download the Motorola L6 modem driver here.

After you download the driver, make sure extract it somewhere inyour computer since I packed it in a ZIP file. Connect your Motorola L6phone by using a USB cable until the system tray shows you the pop-upmessage “Found Motorola L6 Modem”. You’ll meet the “Add New HardwareWizard” dialog box then. Follow the instructions until you told tospecify an exact location for the corresponding hardware, which is yourMotorola L6 phone.
When your files are located, a dialog box will warn you whether tostop or continue the installation since the driver hasn’t digitallysigned by Windows. Click “Continue Anyway”, Windows will start to copythe driver files into a specific location. As the process finished,your Motorola L6 phone will automatically turn its mode to Loud andstart charging the battery.
That’s all. Next thing you should do is set up your internet connection through Start > Settings > Control Panel > Network Connections. Get yourself to the Files menu and choose New connection.. You’ll be guided with a step by step New Connection Wizard.

The problem is the driver for the sata hard drive. You would need to get that from the dell site and put it on a floppy disk, then at the start of the windows install select to install that driver. I ended up just installing the rc version of windows 7 and it worked out fine.

Guest, - if you are using windows Xp it will do that automatically.

dymone - go to www.brvp.com to download the software

Hi,

You need to install a driver from here. Good luck!