Dvr password I dont kow the dvr password

1. Step 1 : Identify the DVR. • Launch the Alien-DVR-Reset-Tool.exe from the USB stick. The USB stick must be present initially but may be removed once. ...
2. Step 2 : Obtain a Reset Code. Ring System Q on 01246 200 000 and quote the. • DVR's serial number. ...
3. Step 3 : Reset the 'admin' password. •

Alien DVR Password Reset Kit

more here

https://www.google.com/search?q=Reset+password+on+alien+hero+dvr

..

For Password Reset follow the below points:-

1.Visit this website https://www.no-protect.com/landing/
2. Create account and login
3. follow the steps to reset your nightowl dvr-thd15w-45-hikproduct password.
https://support.nightowlsp.com/hc/en-us/articles/360038028433-Password-Reset

Will need a model number. H264 is the compression format.

I’m happy to assist further over the phone at https://www.6ya.com/expert/christopher_101fbc448ddafa3d

how do i find manual for a SECUREWISE modle: SW-1016-HVST 16 ch DVR

password reset probalam

go on forgot password

if you forget your phone password you need to reset your phone. you can try resetting your phone through codes. its the safe way to reset your phone. because when you reset your phone through software or hardware there are possibilities for data getting corrupted or lost. but there is no such possibilities when you reset through codes. thats y i prefer this method to reset my phone. i got the codes from this site Unlock-Free.com to reset my phone. try it

Obtain the manual for the mother board. Look for the CMOS reset jumpers the diagrams, it should be three pin with a plastic jumper on two. Move the jumper from the first two pins to the last two pins, then turn on the computer. This will reset the bios. Turn the computer off, then place the jumper back in it's original position so you retain any new changes you make.

If that is not possible, or seems over your head, look for a button battery the between the size of a nickel and a quarter. It usually lies flat on the board, but sometimes is mounted standing on its edge. Pull this battery out of the board while the power cord is unplugged. Press the power button a few times, then wait a while (I've waited a few hours, but 20 minutes or so should be enough.). Without replacing the battery, plug the power cord and turn it on. CMOS should be reset, allowing you to do what you need.

I have a H.264 Network DVR with ver. V2.00.R05 and I've forgotten the password can anyone help with resetting it...
Mikw

My record lock is turn off, but every time I press the record stop to stop record it takes me to the password screen where I must enter a password before I can stop the recording....This piece of xxxxx is stink. I hate my Samsung SHR-1040...I cant even talk to Samsung about it.....When I call, they transfer me to India and they dont even know what a DVR is......I told them DVR 10 times, but they keep repeating to me " VCR"