An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: Pairing headset with phone
You can download manuals from this link:
There is an online pairing guide below:
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Once you make your BlackBerry discoverable, then put the Plantronics
Voyager 510 into pairing mode by holding the call control and volume up
buttons at the same time until
the headset flashes red and blue. Here is the link below for the 510
Turn on Bluetooth within your phone. Put phone into pairing mode.Put headset into pairing mode - With headset on, press and hold call button and the volume up simultaneously until the headset begins to flash red and blue.
Pick the headset for Plantronics when prompted. Enter "0000" (four zeros)
you should now have a continuous blue light blinking.
Putting the Plantronics Voyager 510 into pairing mode:
With headset on, press and hold the call button and the volume up simultaneously until the headset begins to flash red and blue.
Select the Plantronics 510 headset in your phone when prompted and enter 0000
(4 zeros) as the PIN/passcode if prompted. When paired, the Voyager
510 headset should now have a continuous blinking blue light. Here is a
link below for the step by step pairing instructions.
Once you make your cell phone discoverable, then put the Plantronics
Voyager Pro headset into pairing mode by holding the power button until
the headset flashes red and blue. Here is the link below for the
Voyager Pro pairing instructions.
The steps below will show you how to put your Voyager 510 into pairing mode.
To put the headset into pairing mode: 1 - Start with the headset powered on (the headset will have a blue blinking light). 2 - Press in and hold the + side of the volume button (long, thin and silver) and the Call Control Button (on the microphone boom, oval shaped) until the headset flashes red, blue, red, blue. 3 - Tell your phone to "Find the new Bluetooth device" (see the User Guide or call a local phone store). 4 - If the phone asks for a User Code or passkey, enter 0000 (four zeros).