Clock setting for Alpine CDE-7826P

1. In the Clock priority mode, press and holdTITLE for at least 2 seconds while the time is displayed.The time indication will blink.
2. Turn the Rotary encoder CDE-9846 only) or press "up" and "down" (CDE-9842 only) to adjust the hours while the time indication is blinking.
3. When the hour has been adjusted, press the Rotary encoder (CDE-9846 only) or press MODE (CDE-9842 only).
4. Turn the Rotary encoder (CDE-9846 only) or press "up" and "down" (CDE-9842 only) to adjust the minutes while the time indication is blinking.
5. The time is automatically set 5 seconds after the minute adjustment.
6. The time can also be manually set by pressing the Rotary encoder (CDE-9846 only) or press MODE (CDE-9842 only).

Setting Time

1 In the Clock priority mode, press and hold

TITLE for at least 2 seconds while the time is

displayed.

The time indication will blink.

2 Turn the Rotary encoder (CDE-9845/CDE-9843

only) or press 4 and 3 (CDE-9841 only) to adjust

the hours while the time indication is blinking.

3 When the hour has been adjusted, press the

Rotary encoder (CDE-9845/CDE-9843 only) or

press MODE (CDE-9841 only).

4 Turn the Rotary encoder (CDE-9845/CDE-9843

only) or press 4 and 3 (CDE-9841 only) to adjust

the minutes while the time indication is blinking.

The time is automatically set 5 seconds after the minute

adjustment. The time can also be manually set by

pressing the Rotary encoder (CDE-9845/CDE-9843 only)

or press MODE (CDE-9841 only).

• To synchronize the clock to another clock/watch or radio time

announcement, press and hold the Rotary encoder (CDE-9845/

CDE-9843 only) or press and hold MODE (CDE-9841 only) for at

least 2 seconds after setting the "hour." Minutes will reset to 00. If

the display shows over "30" minutes when you do this, the time
will advance one hour.

Or you can ge tthe manual on the link below.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/500/500CDE9843.PDF