Panasonic Video/dvd player DMR ES30v Fault code U99

did you try to recorded or play something?

Error indication u99

After development of the DVD drive and the frame lying under this the cause is nearby a horizontally placed circuit board one Elko 630 uF lid which ones probably lifted presumably is.

Hi
U99 is a fault code, from memory i believe it is a communication error between the dvd drive and its controller, either way the machine needs to be serviced.

regards

TechSupp12

The "U99" error code signifies a "general communications failure."
It is not associated with one specific problem.
It can be related to the version of firmware your DVD recorder is currently using and it has been associated with the TV Guide on screen guide.

If your unit displays U99, turn the power off-unplug the
unit for 5 minutes, and reconnect the power.

If U99 reoccurs, please contact the Global Service Center Network for assistance.

Displayed when communication error has occurred between Main Microprocessor and Timer Microprocessor.Hold down [POWER] until unit powers off. Unplug AC power cord for five minutes then reconnect. If issue still exist have unit service.

U99 ≥The unit fails to operate properly. Press [POWER í/I] on the main unit to switch the unit to
standby. Now press [POWER í/I] on the main unit again to turn the unit on.

Let me know if it is still not operating. there was a power failure and that has caused the U99 code.

You can access the manual by clicking the link i have provided below.

CLICK TO BE DIRECTED TO THE MANUAL DOWNLOAD PAGE


the second manual download link is the true English version and the first download link is the alternate language manual..

A U99 error code signifies a general communications failure and is not associated with any specific problem. It could even be related to the firmware version of your DVD recorder.

Try turning off the power and unplugging off-unplug for at least five minutes before reconnecting.

If U99 reoccurs, you should contact the Global Service Center Network for assistance.

Good luck!

Appreciate the direct "Ask Me".

Since both are record capable:

• hook the Video and Left/Right Audio OUT of the DMR-ES30V to one of the composite/matching INPUT of the DMR-EX88;
• use the DMR-ES30V as a player and the DMR-EX88;
• to be able to watch and monitor the output, temporarily hook up the OUTPUT of the DMR-EX88 to the INPUT of the TV.

Saludos : Yo tenia el mismo problema. Mi dvd DMR-E30 tenia el
mismo problema . Codigo U99 . Y no funsionaba nada.
Entre a la pagina de soportes de Panasonic y baje el Firmware.
Luego lo grabe en un cd ,el cd lo coloque en la dvd y la dvd se actualiso automaticamente. La dvd funciona perfectamente tanto
con DVD-RAM como con DVD-R. Esta solucion la saque de esta
misma pagina fixya . Gracias Fixya. Att. LACF

Dvd recorder doesn't not work. Displays error code U99. Any suggestion please?