Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

WD-52525 too much green and picture is not clear...what can i do to fix it

My brother sold me his WD-52525 to me several weeks ago. I think I messed up something in the TV. You see I had to pick the tv up in New Mexico and bring it to California. At any rate, here's my problem: The picture seems way blurry and not clear at all. I am also seeing a lot of green in the yellow or gold colors while the TV is on. No matter what I do to try and tune the color in the green never goes away and the blurriness never goes away. I am thinking it may be the comcast box; since, it is not the HD box. The picture itself is a bit crooked. Can someone help me with the green and blur problem?

Posted by fred jarumay on

Ad

1 Answer

Lashawn Robinson

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers

. Suspect the FMT PCB part # 930B924002. Supect the DM PCB part # 934C116002 if green tint

Posted on Aug 25, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I power up the TV, the fan turns on and I get the green blinking timer light as usual. Once the light turns off I manually boot the TV with the bypass switch and hear the second fan start up but the...


I would suggest it is a ballast problem. You can check supply of 5 volts to ballast's small 5 pin connector (trigger voltage) and about 300V-330V to large 2pin connector. If both voltages present at the start and lamp is working with in another TV - it is bad ballast.

Aug 11, 2010 | Mitsubishi WD-62725 62" Rear Projection...

1 Answer

Same problem on 18 month old Mitsubishi


As an experiment..plug the tv out of the wall. Wait. plug it back in. Does the green light stop blinking? If so, then the TV needs to go through setup/netcommand again. If not, the problem may not be an easy fix.

Jul 08, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

The blinking status & Time LED lights


DM board n/l/a ....

the only and best way to fix this TV ! ! !

you need to replaced the chassis !!!!!!!!!!!!!!!!!

Nov 20, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Light green and pink spots on my hd tv!!!


Tiny particles of dust on the light engine lens can cause this (and was a service call for me about a month ago), or possibly the expensive light engine.

May 12, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Electrical chasis cooling fan for Mitsubishi wd 52525


There are several Parts Houses that carry this part. The one I think that is the easiest to deal with is Andrews.

The URL is:

https://dealer.andrewselectronics.com

Can't find it there, reply to this post and I will respond.

Dec 14, 2007 | Mitsubishi WD-52525 52" Rear Projection...

3 Answers

WD-52525 Lamp failed 2x in 4 months..is it the Lamp?


do you get an error code? hold the MENU and DEVICE buttons when turning on the TV and get error code

Oct 20, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76287 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...