Question about HP OfficeJet 6110 All-In-One InkJet Printer

1 Answer

HP6110xi filled with packing peanuts in move. How do I disassemble to fix?

Hi! We just moved, and our 6110xi was brilliantly packed directly in a box (not bagged first) full of packing peanuts. The peanuts shifted into every nook and cranny of the machine, even inside behind the white cable that the print cartridges run on, etcetera. I just cannot get everything out, and my printer is currently dead in the water. I need to take it apart to get everything out, but I have no idea how to do that, if it's even possible for me to do at home. I follow directions well, but I'd like to HAVE some before I just randomly starting unscrewing things. Any thoughts? Thanks! :)

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

If you can open the side first or back cover it is helpful to see whats inside. Then you can see where is that peanuts go =). Make sure you open it very careful coz all the material uses to that unit is all plastic. If it doesn't come out u need to look for the screw dont force to loosen it. Make sure you put it back step by step too and dont lost that screws. Good luck

Posted on Aug 04, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to transport your computer from one place to another


<p><span>Most of the people usually save the original containers for items like home electronics and computers, and if you also these containers then it nice method of transporting the equipment. If you have not save it, most moving companies make containers especially for packing, and you can buy containers for packing and protection. And you should have some non-static packing material such as traditional bubble wrap, peanuts and other packing supplies tend to create static.</span><br /> <p><span>These are some useful tips for especial items or things. </span><br /> <p><b><span>Securing your Data- </span></b><span>this is very important to backup all existing data, either by burning it to CDs or DVDs or in other drives. Most of computers provide their users with a set method for backing up all of the data files. This important because using this method you ensure against permanent loss during the move.</span><br /> <p><b><span>Before packing disconnect all cables</span></b><span> - you should remove all cables from main part of the computer. But be care when removing cables, you should remember the cable port and labeled it. After appropriately labeling the cables it is a good idea to store them together in a large plastic bag.</span><br /> <p><b><span>You should empty the equipment</span></b><span> - before packing you ensure that all <span>computer</span> drives should be empty. And all ports should have media cards or other items removed before packing. Printer or other items that use toner and ink cartridges must be removed before packing and preparing for transport. </span><br /> <p><b><span>Final loading of computer</span></b><span> - for finally moving the computer you can hire any moving companies to transport the computer. And you should prefer transport computer in a car rather than in van.</span><br /> <p><span>By using these tips you can move your computer safe.</span><br />

on Dec 24, 2010 | Computers & Internet

1 Answer

Move Office


Good protection of computers.place computer in a garbage bag then place in packing boxes surrounded by with poly stryene foam cheezels or shredded paper. also do this for any thing fragile !

label side of box with room box has to go into as well as destination address, name ,and room on top of each box. As movers place boxes on top of each other and move three boxes on trolleys . you can end up with boxes placed in wrong rooms if only relying on top of box labels.

Move most vital items last into the truck as they will be first out of the truck at destination.

Jul 05, 2016 | Computers & Internet

2 Answers

How do i package for return


http://www.packsend.com.au/

Put in in a plastic bag
Then get a bigger than the printer sized box
Fill the box with shredded paper to surround and protect the printer from physical shock then tape up box so it can't open . Packing tape is good or wide sticky tape. print out a address to send it to with senders address and sticky tape on to top of box and so to protect the label from damage cover completely with see thru sticky tape. .
If you do not have shredded paper buy some polystyrene or plastic sheets with air bubbles in it. Check out a post office they may sell it or office works store or goggle packaging protection

Apr 27, 2016 | Office Equipment & Supplies

1 Answer

Where can I get my Digital Camera or Film Scanner repaired?


Digital Camera and Film Scanner repair: If you are experiencing a problem with a Konica Minolta, Minolta, or Konica brand digital product, please send this item to: Konica Minolta Photo Imaging U.S.A, Inc. Camera Division Attn: Digital Repair 725 Darlington Avenue Mahwah, NJ 07430 When sending in a digital product for service regarding an image quality issue please include a sample image or scan. For scanners also include the actual slide or negative you are trying to scan. This will help our technicians verify and correct any anomalies. Please pack your product in the following way: Place the product in a sealed plastic bag. (Please do not use tape to seal the bag.) Place the bagged product inside a sturdy corrugated cardboard box. Place enough dry packing material around the bagged prodcut to make sure it does not travel within the box during shipment. The best material to use is foam packing "peanuts." You can also use popcorn. Please include a detailed description of the problem(s) you are experiencing. If this item is under warranty, please include photocopies of your dated sales slip and Warranty Card. (If we are unable to verify your proof of purchase, we may have to treat the services as an out of warranty repair, in which case you will receive a written estimate for your approval before we proceed.) Remember: Konica Minolta will not assume the responsibility for damage encountered in transit and will institute charges for any repairs required. In fact, such damage specifically voids any warranty otherwise in force. Please submit a troubleshooting Interactive Q&A detailing the problem that you are experiencing for assistance and further instructions on repairing your digital product.

Sep 15, 2005 | Konica Minolta DiMAGE 2330 Zoom Digital...

2 Answers

Where can I get my Digital Camera or Film Scanner repaired?


Digital Camera and Film Scanner repair: If you are experiencing a problem with a Konica Minolta, Minolta, or Konica brand digital product, please send this item to: Konica Minolta Photo Imaging U.S.A, Inc. Camera Division Attn: Digital Repair 725 Darlington Avenue Mahwah, NJ 07430 When sending in a digital product for service regarding an image quality issue please include a sample image or scan. For scanners also include the actual slide or negative you are trying to scan. This will help our technicians verify and correct any anomalies. Please pack your product in the following way: Place the product in a sealed plastic bag. (Please do not use tape to seal the bag.) Place the bagged product inside a sturdy corrugated cardboard box. Place enough dry packing material around the bagged prodcut to make sure it does not travel within the box during shipment. The best material to use is foam packing "peanuts." You can also use popcorn. Please include a detailed description of the problem(s) you are experiencing. If this item is under warranty, please include photocopies of your dated sales slip and Warranty Card. (If we are unable to verify your proof of purchase, we may have to treat the services as an out of warranty repair, in which case you will receive a written estimate for your approval before we proceed.) Remember: Konica Minolta will not assume the responsibility for damage encountered in transit and will institute charges for any repairs required. In fact, such damage specifically voids any warranty otherwise in force. Please submit a troubleshooting Interactive Q&A detailing the problem that you are experiencing for assistance and further instructions on repairing your digital product.

Sep 15, 2005 | Konica Minolta DiMAGE 2300 Digital Camera

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...