Driver needed for Sipix Pocket Color 200 Printer for xp or vista

First check to make sure that you have the correct com port selected.
then set the com port to use these settings.

11520 Bits per second
8 data bits
no parity
2 stop bits
hardware flow control

I have one of these printers. If you have the 32 BIT VERSION of vista, or 7 this printer will work via the serial RS232 port using the windows 2000 driver.
This driver does not work with the 64 bit versions of these operating systems. I don't know of any driver for 64 bit systems.
32 bit versions of Ubuntu do have a driver for this printer as of the 2016 version.

the Sipix A6 pocket printer uses these settings on the com port:

11520 Bits per second
8 data bits
no parity
2 stop bits
hardware flow control

I hope this info helps out.

Windows 7 should be able to use Vista or XP drivers, but you should have no trouble downloading Win7 drivers:
http://www.driver-fix.com/driverdetective.php?t=Pocket%20Printer%20A6%20Drivers

http://www.bioticaindia.com/pocket-printer-a6.html

http://cr.am/framed.php?url=http%3A%2F%2Fwww.buymebuyme.com%2Fretail%2Fdownloads%2FSiPixA6XP.exe&ref=driverguide

SiPix never had a Vista driver. Most new computers, like mine, do not have serial ports. Here is how I got my A6 working with Vista --

1. Purchase a serial to USB converter cable. (I got mine on Ebay for about $4.00.) Plug one end into the serial cable that came with the A6 and the other end into a USB port on the computer. Vista automatically picked up and installed the converter cable. In Device Manager, it shows up under Ports and gives it a com port number. Right click on the device and click on Properties. Click on the Port Settings tab and change Bits Per Second to 115200, Data Bits to 8, Parity to None, Stop Bits to 2, and Flow Control to Hardware per your A6 Owner's Manual. Click OK.

2. Now go to Printers in the Control Panel. Click to add a printer. Follow on screen prompts. Whe asked what port the printer is on, highlight whatever port the USB converter cable was assigned to. (In my case, Com 4.) When asked for the driver, direct it to the CD Drive where you have the A6 driver disk. Direct it to the Windows 2000 driver. If you try to use the XP driver, it will tell you it is the wrong OS. The 2000 driver will install. Your A6 should now be installed and show up in your list of printers.

My A6 now prints from any program or the internet using Windows Vista.

The printer hardware does not support vista, hence there no drivers for vista by lexmark .

Here is the Driver/Software for Windows XP

and here for Windows VISTA

msp tvse 345 printer is not work