Epson TM-T88IV causing small margins when printing to Lexmark 250dn
After installing the Epson TM-T88IV, when printing to the Lexmark 250DN the pages print out with the same narrow margin as the Epson. So in redures printing to the lexmark useless. Any ideas on how to solve this? I have been able to solve it temporarily by creating a new profile but the problem returned after about 1 month.
Thanks in advance!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check the margins of what you print..then check when you click print it will show the dialog box prompting you that you will print the blah blah blah...then click properties,,another dialog box will appear check if the page layout of your printing document and your printer settings are the same...hope it can help you..
You must first uninstall the printer from the Control Panel. Reboot the PC. Then reinstall the printer with the printer NOT connected. Then connect the printer and allow Windows to detect the printer and load its drivers. When you get a message in the right bottom corner of the screen "The new HW has been installed and is ready for use" then fireup the word processor and set this printer as default printer and start printing. All the best to you.
Did you set it up using Epson's receipt printer drivers? If so, right click on it and choose properties. Under the PORT tab, check and make sure it is set for proper port (LPT1, COM1, USB, etc). If you make changes, click APPLY, then OK. Then Right click, PROPERTIES, Print test Page. If you can't get test page to print, your wasting your time sending codes to printer.
Let me know if you need more assistance.