An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: canon muti-pass MP360 INK TANK FULL
I believe what you are seeing is "WASTE INK TANK FULL"? This means that the tank that collects the waste ink from cleaning the head is full.
You can read more than you ever want to know on this subject on the following link:
These are the steps to clear the message by reseting the counter:
1)Printer on, press Additional Functions, Scan, Copy, Scan
Now you should be in service mode from there for waste ink tank reset
2)Select Test mode which is like the last available selection
3)Select #8 Printer Test, it will do something here like cleaning or something then it will come up with some other options this is where it gets a bit confusing cause now all it says is like 8-2 or 8-3 push the + or - button until it says 8-3 then hit the select button
The menu will now say EEPROM Clear
Select Ink count which is option (0) and press set
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
<Remedy> 1.Waste ink absorber Use SERVICE MODE>COUNTER>PRINTER>W-INK to check the waste ink absorber. Replace if the waste ink level is near the limit (14400). After replacing the tank, perform SERVICE MODE>INITIALIZE>W-INK.
Some user tried the procedure to reset waste ink tanf full on Canon MP 360 and ...Reset Ink Level for Canon MX300 · Reset Counter Canon iP1500 and iP1000 ... tricks-collections.com/waste-ink-tank-full-reset-canon-mp360/
The POWER Lamp Flashes Orange
Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used
during print head cleaning. Eight flashes indicates that the waste ink tank is
nearly full. Press the RESUME/CANCEL button to cancel the
error so you can continue printing. Before the waste ink tank becomes completely
full, contact a Canon service representative.
Canon recommends that you call for service as soon as this
error occurs. Once the waste ink tank becomes completely full, printing will no
longer be possible.
Inkjet printers have a fibrous pad inside them that collects the waste
ink from cleaning the print head. Over time, this pad fills up with ink
and can no longer hold any more. When this occurs, the printer
indicates a "waste ink tank full" error.
the waste ink absorption pads is something an authorized canon service
facility can take care of for you. Once they are replaced,
it'll be functional again.
Your printer has a built-in waste ink tank for the ink used during
print head cleaning. As time goes by, the waste ink tank gradually
fills. When the waste ink tank is nearly full, you should receive a
"Waste ink warning" error when you print. Press the RESUME button on
the printer to cancel the error so you can continue printing. Before
the waste ink tank becomes completely full, have the waste ink tank