I don't remember the password I set up.

Originally, service providers set the password to the last four digits of the phone number.
If that doesn't work, try "1234".
If not, try "0000" (another generic codes for many different phones).
If these methods don't work, call your service provider and tell them you still remember your password. They will reset it for you and give you the new code.

Have you tried the default password? The default password is the last four digits of the phone number assigned to that phone.

Hope this helps

If u dont no the password or got it with password was already like that,,theres a sony 1800 number,,they have four digit codes to get through that,,tell them u forgot it,,,try 4444,or 0000,,old ps2 codes ,,can find number on box if u have psp box,,or psn,,online for number,,goodluck

1 Enter the number you think is your 4-digit unlock code. Do it once slowly, so you don't waste the number of tries you're allowed before the cam completely locks. If you never set a code, try 1234. The factory sets this as the default. If that fails, try the last four digits of your home phone number. That's the default of some network providers. If all these fail, go to Step 2.

2 Click the menu key, which has horizontal lines on it. It sits between the left and right soft keys and above the round 5-way navigation keys. You should now see the unlock code bypass screen. Enter your 6-digit security code. Select "OK." If this doesn't work or you don't remember your security code, go to Step 3.

3

Try 000000 as the factory default setting for the security code. If that doesn't work, go to Step 4.

4 Call your network's customer service center. Locked ones usually let you call both customer service and 911. However, calling on a separate phone will make entering the code they give you easier to enter and test while they're still on the phone with you.

HID KITS.

Press the four buttons for your personal entry PIN, then press and hold the * button.

The opener light will blink three times. Release the button.

Press the temporary 4-digit PIN you have chosen, then press Enter.

The opener light will blink four times.

To set the number of hours this temporary PIN will work, press the number of hours (up to 255), then press *.

To set the number of times this temporary PIN will work, press the number of times (up to 255), then press #.

Test by pressing the four buttons for the temporary PIN, then press enter. The door should move. If the temporary PIN was set to a certain number of openings, remember that the test has used up one opening. To clear the temporary password, repeat steps 1-3, setting the number of hours or times to 0 in step 3.

try the last 4 digits of your phone number

Here is the sollution turn the unit on and hold the enter key untill four dashes are displayed then enter 66214 the digits will not display but the last four digits so dont worry about that and hit enter the word pass will be displayed and you can continue from there. Remember to reset the pass word/number to your own or else you will need to repeat this again.

The password is usually the last four digits of your phone number. Say your number is 1-262-545-6546. Your password would be 6546.

Problems with V-Chip/Parental Controls
The rating limits don’t work
• For rating limits to take effect, you must lock V-Chip settings to activate them.
I don’t remember my password and I want to unlock the TV
• If you forget your password you can reset it. Enter 5898 as the password and then change it
to a new one.

For anyone coming across this with the same problem the solution is probably going to be reflashing the ROM. If you don?t have the CD you can usually buy one on Ebay for $5.