I am getting sound to the dvd player but the picture is blank. If I move the flip screen or hit the button (RESET?) for when you close the screen the button is pushed. The picture will flicker and show some of the movie that is playing. It has work for a moment until I move the screen, then it goes blank.
I am looking for a GOOD battery for craig ctft701 poartable dvd player
[email protected]
Posted on Sep 25, 2008
I TRY THE RIBBON BUT IT STILL DOES NOT HELP
Posted on Jun 05, 2008
I had this same problem and its the kink in the ribbon wire
Posted on Nov 15, 2007
My screen would flicker when you tilted it back and forth. Sometimes it would cut out and moving it would make it come back on. I took the battery off and opened the screen from the front(2 screws in hinge & 2 screws under rubber plugs). There is a ribbon plug inside. Mine looked kinked in one spot so I just repositioned it so the kink was in another spot. Everything worked fine after that. Hope this helps.
Posted on Sep 16, 2007
1,160 views
Usually answered in minutes!
I get sound but no picture on my Craig CTFT701. This only happens when I use battery power and not the AC adaptor. The
I have sound but no picture when I use battery power and not the AC adaptor. I have no loose wires. The battery seems to charge properly. I have pressed reset. I did not find anything in the menu to cause this.What do I do?
get sound but no picture
same problem,used a disc cleaner nmerous times,still no picture
picture on screen is blank
×