Question about Electrical Supplies

4 Answers

Wiring diagram for Generac engine on standby generator

I need this wiring diagram for a 9777-2. The motor has no spark to plug. It is a 4000 watt engine-generator set.

Posted by nfaessler on

  • 1 more comment 
  • Anonymous Mar 14, 2014

    seems to have no spark at the spark plug .... have tried 2 plugs.

  • Anonymous Mar 29, 2014

    I need wiring diagram for decision maker 2 generator

  • Anonymous Mar 29, 2014

    I need wiring diagram for kholer
    decision maker 2 generator

×

Ad

4 Answers

John McKinney

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 42 Answers

Here is a wiring diagram for that engine:

wiring diagram for Generac engine on standby gener - c807c96.gif

Posted on Mar 13, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a perkins engine that would no start

Posted on Sep 12, 2010

Ad

sherlywang

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Electrical S... Master
  • 425 Answers

This is the wiring diagram for a 9777-2 genset.



wiring diagram for Generac engine on standby gener - iplimage.php-0keg3qlradj0igqss3d4ukil-1-0.gif

Posted on Jan 04, 2019

Chris Hardy

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need the ignition diagram for a generator its a tomahalk 4.4kva digial sine wave generator i want to make the ingnition a toggle push button start from the hous but i can get it to tun on fine like that but not off again any suggestions please hrishardy37 (at) gmail, thanks heaps

Posted on Jan 11, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a wiring diagram for a 1982 generator model number 4BPH SE/F4 4000 WATTS


need more info---a name brand of generator with engine type and double check the model number---could not research any info as something missing somehow----I'm not trying to get smart but nothing seems to cross??

Jun 11, 2017 | Watts Electrical Supplies

1 Answer

What is the point gap for model:CCKA-S/25830?


Spark Plug # RS17YX for Onan 167-0272 on RV Gensets ...

www.partsfortechs.com > Home > Generator Part
Generator Parts Spark Plug # RS17YX for Onan 167-0272 on RV Gensets ... for this plug require the spark gap to be set at .025" (25 thousandths of an inch).

Onan Gen HGJAB What is the best spark plug and gap? - Heartland ...

https://www.heartlandowners.org/.../39632-Onan-Gen-HGJAB-What-is-t...
Jun 8, 2013 - 3 posts - ‎3 authors Also what is the the correct gap on the plugs? ... brands · Generators; Onan Gen HGJAB What is the best spark plug and gap? ... Gap: 0.025

Nov 04, 2015 | Watts Onan Portable Generator - 4000 ,...

1 Answer

My 1988 georgie boy motor home onan generator 4000 watt has no spark out of coil to plugs?


check and see if it gas a kill switch some were on it follw a black wire out of coil see were it goes maybe to a kill switch look for it

Sep 04, 2014 | Electrical Supplies

1 Answer

I have a Briggs and Stratton Elite series5500 watt portable generator. I cannot get it started. It has gas and oil but will not start. What could be the problem


Ensure choke is turned on while starting.
Ensure spark lead is fully pushed onto plug.
Remove spark plug and check there is a spark by keeping spark plug against body of engine and cranking engine, if no spark check there are no broken wires in ignition circuit.
Turn off gas tap if present. Remove the float bowl while holding a container under it to collect any gas. Turn on tap and check the fuel flows freely.
Check the air filter is clean. If it has foam elements these can be washed with warm water and detergent, rinsed and then oiled with a teaspoon of oil evenly distributed through the foam.

May 01, 2011 | Briggs & Stratton Briggs and Stratton...

2 Answers

My 5700 watt 11 HP McCullough generator wont start. I'm getting good gas to the plug but no spark.


The spark coil is bad if you have no spark

Small engine repair. Part is expensive.

Have you checked spark for sure?
1) Spray WD-40 directly into carburetor
If machine has spark, it will fire
2) Is exhaust port clogged with carbon and dirt?
3) Get new spark plug
Pull out old spark plug
Put spark wire on plug
Hold spark plug wire with fingers
Put spark plug threads against metal opening where spark plug came out.
Metal to metal
Pull cord or push starter
Look for spark between metal

No spark, then spark coil is bad.

Oct 25, 2010 | McCulloch 13HP 338 Cc Portable Generator #...

1 Answer

I have a micro quiet 4000 starts up but surges up and down , could it be just old gas making it run so bad


The reason can be:
  1. Bad or loose ignition (spark plug, magneto, coil cable etc);
  2. Water in the gas;
  3. Dirty fuel strainer;
  4. Not set on level surface;

Jul 10, 2010 | Watts Onan Portable Generator - 4000 ,...

1 Answer

Onan generator service codes


Check the spark plug and the ignition coil for good sparking.

Get the spark plug out, or with another spark plug connected to high voltage cable, outside the motor, the outer part of the plug connected to motor ground and see if spark is present at cranking.

Jun 30, 2010 | Watts Onan Portable Generator - 4000 ,...

1 Answer

Tappet clearance and spark plug gap on 5.5 hp ohv engine, i have a generator which runs on natural gas made by china i just want to know the gap of tappet and the spark plug gap


I have a Robin but they all are pretty much the same for plug gap and tappets. I worked in a lawnmower small engine repair shop for many years in San Diego
I set them all the same and never had one return. I just did mine a couple of months ago and hand lapped the intake and exhaust valve seats. Starts first time everytime like the 7.5 year old unit is new!!!

Plug gap 0.19

Tappets

Intake .005 cold
Exhaust .006 cold.

Jan 25, 2010 | Watts Onan Portable Generator - 4000 ,...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

11,348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Gene Haynes

Level 3 Expert

5391 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18515 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...