Connex 3300 240-Channels Base CB Radio Logo

Question about Connex 3300 240-Channels Base CB Radio

1 Answer

Correct wiring for a ASTATIC TEARDROP MIKE to a RANGER RCI 2950DX

Posted by ken_davie on

  • paul diamond May 19, 2009

    I need the wiring diagram for an original astatic teardrop to a midland alan 48 excel



    Thank you

×

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

Here is the info you asked for the following is the correct wiring.


Mic Wiring Info
Stock Mic Wiring
1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
Turner 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Black
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Turner 6-Wire MIC. Wiring
1. Ground Shield & Red
2. Audio White
3. Transmit Blue
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 4-Wire MIC. Wiring
1. Ground Shield
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Astatic 6-Wire MIC. Wiring
1. Ground Shield & Blue
2. Audio White
3. Transmit Red
4. Receive N/C
5. CH. UP N/C
6. CH. Down N/C

Posted on Mar 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Rci 2990

Mic Wiring Info
Stock Mic Wiring
1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
0helpful
1answer

I need the wiring code rd104e mic to a rci 2950 dx 6 pin

1. Ground Shield
2. Audio Yellow
3. Transmit Red
4. Receive Black
5. CH. Up White
6. CH. Down Blue
0helpful
1answer

Rci-2950dx 4 pin microphone wiring schematics

you can't because of the up/down buttons on the mic. the 2950 is a 6 pin and the d-104 is a 4 pin. If you can figure a way to eliminate the u/d switch then go for it. there is a wiring diagram on www.cbtricks.com
0helpful
2answers

When i turn on my connex 4800 dxl all that lights up is the power meter no chanel display or freq display no sound either

The voltage regulator on the right side of the radio (with the parts side up ) is located in between the 2 side screw holes is ether bad or the legs are broke loose . it is a A1869 transistor.can be replaced with a A473 Transistor . Basically it's the same as a Galaxy Radio ,Ranger makes the boards for (RCI ,Galaxy , Connex , North Star ,Super Star, General Lee .) Hope this Helps.
0helpful
1answer

Mike wire color coat.

1 is shield (and may also need blue for astatic mic or red for turner mic)
2 is audio (white on astatic and turner mics)
3 is Transmit (Red on astatic mic or blue on turner mic)
4 is receive (Black on both astatic and turner mics)
If your mic isn't an astatic or turner, email me with what mic that you have and I'll try to help. [email protected]
0helpful
2answers
1helpful
1answer

Teardrop - icom 706mkII

http://homepage.ntlworld.com/rg4wpw/astaticbook.pdf
0helpful
1answer

Very old astatic 525 mike wiring

Hello..maybe not a solution..but a hint..measure red-black for 0 ohms while pushing "ptt button" i think it's ptt...bare and transparent is mike...but you can look at original mike and make the same measurement for finding out what is ptt..the two others is mike ...good luck...Ron
Not finding what you are looking for?

1,193 views

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Steve

Level 3 Expert

3290 Answers

Brad Brown

Level 3 Expert

19166 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...