Pioneer 9600 when i try to eject the cd or flip open the screen to reveal the oel display i cant and get 2 beeps and a message flashing MIC IN!!! ive tried resting it and also unplugged it but nothing seems t work. ????? can anyone help...

if you turn it on, and it goes green then yellow then beeps 3 times and flashes red, then your ps3 has overheated and been damaged. you can fix it with the heat gun trick, http://www.youtube.com/watch?v=4_Ic1_TY-GU

but it will only break again.

try flipping the switch in the back, then hold the eject button while you flip the switch back on, that should eject the disc.

to get the disk out..

1: switch it off from the back
2: Hold eject while flipping the switch back on and your game should come out.

What you need to do first is up date it by typing *228 then perss 2 and it will restart your phone. That might do the trick.

go to ebay.com search for (deh-p7800mp ribbon) face paate ribbon is probably bad i got one fixed it right up.

press #409 to cancel message receive
press #64 follow by et\xtn on display to cancel sent message

mayb st 21 been assigned, but no body know.to check, call from all extn to displayed phone.check 1 by 1.
if light keep blinking for mic, try to change other key phone 

Sounds like you may need your screen replaced.

Upon turning on your laptop,
Keep pressing F8, until you hear a beep. This will give you the option to boot to safe mode. When you hear a beep, and NOTHING comes on your screen within 20 seconds, you need to have your LCD screen replaced.

Typically if its a hardware problem such as RAM, you'll hear 2 beeps or a POST message will display on your screen, letting you know that a certain piece of hardware failed.

Ive seen problems occur when people change a setting such as :
Right click on your desktop --> Properties --> Settings --> Advanced Button

And changing your DPI. This can cause your screen to go out (Not display anything). If its up to high chances are your LCD screen can not handle it. If you boot to safe mode, then you can fix this. Again if you cant boot to safe mode, then you have a mad LCD.

Give this a try and let me know what happens.

Oh one more things.

One thing i have also seen, more than once, and till this day i can not explain it, but a USB device plugged in. Remove ANY USB device plugged to your computer. Printer, FLASH Drive, Mouse, etc. Then turn on your computer.

If you have a floppy drive, remove the floppy.
If you have a CD/DVD in your tray, turn the computer on to take it out.

there may be a lock/unlock selection in the menu somewhere, something like a parental lock on tv sets, this is just a thought on my part.

try pacparts.com for the other ribbon cable that goes to the OEL display

yes it is a over heting problem

The flexible pcb that connects the front to the main board needs replacing, common fault