Jabra GN1200 headset

SOURCE: Cannot pair a7010 with Plantronics Voyager 520

The actual problem was Plantronics, I was not turning on pairing mode. I was confused with quick pair which starts not immediately after turning on, but you need to hold the button longer until led will start blinking blue and red.

Posted on Aug 23, 2008

SOURCE: unable to connect jabra t5330 to a cisco ip phone 7941G headset jack

You can solve this by connecting your phone inline.
On the back of the phone where the phone handset plugs into, plug one end of the jabra headset wire & connect other end to the 2nd position (marked by phone & handset). Now plug the handset wire from Ip phone to the 1st position (marked by handset) in the jabra headset. Now you are good to go.

When the phone rings lift the phone handset and answer it with your jabra headset. You can't use jabra with 7941 without lifting the handset on phone.

Posted on Jan 28, 2009

SOURCE: Jabra GN5035 headset - cannot hear anything through it.

I have exactly the same problem, using Vista for now.

Posted on Apr 24, 2010

SOURCE: I just got the Jabra

what i gather from what you have said is that the headset doesn't ring at all. this would indicate to me that the headset is not paired with the base.
normally when pairing devices the base station will look for the device but at the same time you will have to hold the headset power button for at least 5 seconds for that the other device can capture the signal.
i will look into this for you but try this method if applicable but the bluetooth devices do have to be paired in order to work.

Posted on Jun 15, 2011