Singer CE-200 Quantum Futura Computerized Sewing Machine Logo

Question about Singer CE-200 Quantum Futura Computerized Sewing Machine

3 Answers

Help Hello. I have recently purchased a futura ce200. When i take a design of my own and try to use it it goes through the step by step process on the computer screen then starts stitching out the design on the computer, and then the whole program just shuts down. I have used a design that i knew already worked as i had used it before and it still shuts the whole program down. If this is any help when you re open the programme futura says CD-Cops v1.11 #4904 and asks me to connect to the internet however where the machine is i do not have internet Can you help please? Thanks Amanda

Posted by Anonymous on

  • Anonymous Aug 07, 2007

    i just tried the patch however it said programme not installed but i can open the programme and use it sorry bout feedback aint got to grips with the site

  • molly molly Feb 09, 2008

    I have the same problem with it shutting down before it is completed i am instructed to remove the hoop and cut the machine back on that does not help very frustrating please help

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

@ molly molly

I think you problem is a different one. When you used your own design, I assume it was an embroidery file not digitized or made with the Futura software. In this case keep in mind that the Futura machine can only accept a limited number of stitches (about 5000) when the design is transferred from the computer to the machine. Try dividing the design into several blocks with no more than about 5000 stitches and send them to the machine sequentially.

I hope this helps!

Aki

Posted on Mar 28, 2008

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 84 Answers

Hi keenkitten...The updates for your software can be found at the following URL: http://futura-support.com/downloads/patch.htm Ensure that you select the applicable OS update...Good Luck my friend.

Posted on Aug 02, 2007

  • Anonymous Aug 02, 2007

    Hi keenkitten...your vote indicates that your issue has not been resolved, and I would still like to work with you until your issue is resolved but more communication is needed.

    Because I don't have any specifics on what/why you haven't achieved a resolution, I will share what I have interpreted from your original post. 1) You have a CE200 embroidery machine. 2) Combinations of your Machine and patterns have a history of success. However, currently, this history is now corrupt. 3) Coinciding with the development of this flaw, you also began receiving a message of "CD-Cops v1.11 #4904", and instructs you to connect to the internet. 4) The CE200 is not able to connect to the internet due to it's physical location. Please correct me by updating your post if I have any errors or misuderstandings.

    Now I will share what I have assumed out of neccessity in order to form my original post. 1) You have access to a computer with internet access. 2) On a computer, you have installed the Singer Digitizing Software that is included with the CE200. 3) You have read your Owners Manual, and perhaps practiced digitizing your own designs on the computer, and during this learn/play process, became knowledgeble in the mechanics of transferring the information from a computer, to your CE200. And to accomplish my original post, you would first open your Singer Software, Select WebHelp, and once your default browser was automatically opened, you would click on the URL that I provided. If any of these assumptions are incorrect, please correct me by updating your post with specifics, and I will do all that I am able, so that you regain your productivity and enjoyment of your Machine.

  • Anonymous Aug 08, 2007

    Hi keenkitten....Could you please update your post with more details, and try to be as specific as possible. I'm having difficulty understanding exactly what you mean by "not installed". Did you click the appropriate file to physically install it into your Root Directory on your Computer? I do understand that you are able to access and use the software, however, unless properly installed into your Root Directory, we will be unable to update your Embroidery/Sewing Machine.

×

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

It probably needs to update with the Singers program, it might have a deleted memory file or something so you really need to find somewhere you can possibly get online. Sorry

Posted on Aug 02, 2007

  • Anonymous Aug 02, 2007

    I realize that it doesnt help but you could of just rated me irrelevant. i answered your question. You NEED to get an internet connection to update it. Im sorry.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Hi.My Singer Futura throws error message to make sure that cable is connected and machine turned on.

I suspect the incompatibility is between the software written for a CE350 machine trying to communicate with an older CE200 and not the PC operating system/hardware. Try the CE-250 software... free download from singer. http://www.futura-support.com/products/ce-250/software
0helpful
1answer

What embroidery download formats can be used on singer ce200

It depends on your software version. The list of supported formats could be found in the manual, on Futura support site or checked right through the sofware menu (File->Open, File->Save as)
0helpful
5answers

Singer CE-200 Quantum Futura

There is a patch for Windows 7 at www.future-support.com. That site is an amazing resource for the Futuras!!
3helpful
1answer

Singer futura ce200 software problem

You may ask your Singer supplier about Futura 2.5, this version of the software supports old machine models ce100/200, contains more features like the software for newer machine models and works under new OS including Windows 7.
0helpful
2answers

My futura ce200 is driving me insane because i have the small hoop selected on the computer but the machine thinks that the large hoop is selected. How do i fix it??

Before attaching small hoop, turn on power switch to
move the carriage to embroidering standby position, and
turn off power switch.

check troubleshooting in manual

user manual link
http://www.futura-support.com/files/CE200-Eng_Fre_Spa040607.pdf

hope this helps and you get it working soon =)
0helpful
1answer

Futura ce200 software - LOST!!

Hi, software is available to purchase from the following website http://shop.jennys-sewing-studio.com hope this helps you out.

Steph
0helpful
1answer

Futura CE-200 Stops in middle of design and says wrong hoop size

Dear cjnations
Firstly we must all remember that the CE200 is a very particular machine and requires that you follow certain procedures in order for it to run smoothly. When using the small hoop, firstly you must make sure that the small hoop is selected on the screen by going to Tools, Select Hoop & clicking on small frame. Once this has been done and the design selected, you must then attach the small hoop before sending the design to the machine. If you attach the hoop after sending the design, the machine will give you the error message.
Good Luck!
0helpful
3answers

Vista unable to install Futura software

check for your disk size!
try to check also for the software properties labeled on the CD especially its memory and disk allocation requirements!
it may also need you to connect the machine to the computer first before installing its software!
Not finding what you are looking for?

276 views

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Cindy Wells

Level 3 Expert

6470 Answers

David Shaub

Level 3 Expert

2994 Answers

Richard
Richard

Level 1 Expert

47 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...