Hotpoint lft114 cupboard door fitting instructions

https://www.manualslib.com/manual/766170/Hotpoint-Lft-114.html?page=13

Hello J Arnott,

Sorry to say I'm here in the USA.. and I could not easily get a similarly designed model to reveal itself (for me) to gain a better understanding of your Hotpoint LFT114... (nor could I pull a FREE copy of your user manual (without registering or otherwise exposing myself to cyber-freaks (sorry)).

Regardless of the specifics.. suffice it to day your machine is NEW enough to be quite visible and relevant...
I looked over the LFT114 HA... Display board... £42.93
(there are many LFT114

And your trouble description was quite excellent in detailing
as SEQUENCE failure of your control modules...

Although it is possible to repair these things ... it seems you have several PCBs (printed circuit boards)... replacement is usually the first best GUESS (looking at the back () side would not hurt anything)...

I have rescued many a circuit board by simply "de-soldering"...
then re-soldering a connection...
(special care, skill & tools required... not tough nor expensive).

You description and troubles indicated the beeps & lights missing: is a clear indictment of your "DISPLAY board"...

A reminder... don't touch any PCB you value without first grounding your hands (professionals use STATIC WRIST STRAPS... CHEAP (unlike circuit boards) & available EVERYWHERE).

Also... Take lots of pictures of EXACTLY WHERE every wire comes from... (look them over BEFORE you get in trouble).
Be patient & FORCE nothing.

and of course... be safe (REMOVE POWER).

Comment me back BEFORE you guess wrong... (I'll try to help) .

Spares:
Hotpoint LFT114 HA PCBs Modules

does it need salt? or finisher?

3rd and 4th light flashing. Problem with control board. how to replace control board?

Hi when adjusting the legs just get it squair with the counter top keeing also level , it is ok if it tips towards the rear a little ,,once you get it set then install the two screws to keep it from moving ,

G.E. motors (G.E. and Hotpoint) have an issue with the impeller seizing. Turn the electricity to the appliance off. Remove the lower front panel(s) to gain access to the motor and its impeller. Take a flat head screw driver and carefully insert it within the motor impeller area and try to turn the impeller clockwise. If stuck or hard to turn, keep trying until it loosens (turns freely). If it turns freely, activate the dishwasher and see if it works for you. If the motor impeller does not turn, contact an appliance service company.

You need to seperate the 2 halves of the door, remove all screws securing the 2 halves together, and prize apart.
You will then see how all the parts are fitted.

Door seal on properly? Or like most cases the kids us the door for a step ladder to reach the top cupboards and have bent the door frame.

You can download GE / Hotpoint owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Luckily the hotpoint helpdesk admitted that the instructions for hanging the kitchen doors does not come as part of the standard instructions. There should be a seperate piece of paper with these instructions.

After some to'ing and fro'ing they managed to email me the required diagram.