Lenovo desktop turns on but says press any key

To start the Setup Utility program, do the following:
1.
If your computer is already on when you start this procedure, turn off the
computer.
2.
Repeatedly press and release the F1 key when turning on the computer. When
you hear multiple beeps or see a logo screen, release the F1 key.
Note:
If a Power-On Password or an Administrator Password has been set, the
Setup Utility program menu is not displayed until you type the correct
password.

To change the boot order, you will want to go into your BIOS. From the HP.com website it shows the following below to enter the BIOS:

BIOS Setup Utility Information and Menu Options

1. Turn off the computer and wait five seconds.
2. Turn on the computer and immediately press the F10 key repeatedly until a BIOS Setup screen opens. If nothing happens, press the F1 key repeatedly.
   

Use the arrow keys to move through the options (Note the commands key list in the lower right of the link I provided to HP.com) You will likely need to enter the advanced area to change your boot order.

syncronised it with what ??
Restart your computer

During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key
this will vary depending on your computer and operating system usually the Delete or the F2 key

Press and hold that key during the boot up process to enter BIOS using the arrow keys to navigate load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart.

Restart your computer During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key this will vary depending on your computer and operating system usually the Delete or the F2 key Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart.

If your Lenovo desktop is pre-installed with Windows operational system, press one-key reset key when your laptop is power off. Or press Shift + B to come back to factory setting instantly when Lenovo desktop is open.

Or press F2 when your Lenovo desktop is powering on. Few seconds later, a dialog pops up with several options, one-key reset and reset factory setting. Follow the operation wizard to reset factory setting is OK.

Related topic:

How to Factory Reset Samsung laptop?

Restart your computer
During the boot process you will see on the screen to press a certain key to enter setup

Press and hold that key during the boot up process to enter BIOS using the arrow keys scroll down to advanced bios features press enter to change boot devices
press f10 to save to cmos escape then restart your computer

if you need to change any of the settings using the arrow keys if you have made any changes that has compromised your computer
you can go back and load failsafe or optimised defaults

hope this helps

Seems like a file is corrupt Try using the disks the computer came with to fix any errors

Hi,
Welcome to FixYa! The problem that you have is about the Operating system and there are two ways of fixing the problem which is by using the Recovery Disc or using the One Key Recovery Button. Please follow the steps below for you to be able to fix the problem. If everything is done and its still the same, most probably, the problem is with the Harddrive.
For One Key Recovery:
1. Turn off the computer.


2. Press the little button near the power button, it usually do have a drawing of an icon that looks like a horse shoe or a headset.


3. There will be a window that will appear which do have three option, One Key Antivirus, One Key Recovery and System Setup. Choose One key Recovery.


4. There will be another window that will appear which do have two option, Restore from initial backup and Restore from user backup,Choose Restore from initial back up


5. It will asked you if you want to continue, Just click on OK or YES.


6. Once done, Reboot the computer.


For Recovery Disc,


1. Insert the disc inside the drive.


2. Turn off the computer then turn it back on and keep on tapping F12


3. There will a window that will appear which do have three options, HDD,ODD/DVD/CD, and NAT, choose ODD/DVD/CD


4. It will asked you to press any key immediately, you will need to press any key immediately so that it will boot from ODD.


5. It will asked you to choose a partition, choose Disc 0 partition 1


6. Reboot computer once done.


I hope this information will be helpful. Thank you for using FixYa...

when i am enter in the lenovo bios in bios option have four option for first boot device. which i am select.

What about removing the hard drive from the laptop and put it into sata box, to be USB external drive.
And then get out your important data, and format the hard disk.

and try again to boot???

If it doesn't work , try to replace the memory it might be the problem with the memory.