At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Enter in Service mode : press Utility key - Meter count - Details - Stop -00 -Stop - 01 Enter password 00000000 press End select counter select Trouble reset and Exit.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually you hold the Open/Close Button 10 to 15 second to shut down the player,
Reopen to see if it is OK
if not you will have to reset it you should have a little hole somewhere to insert a pin for reinitialisation of the player. (you are not giving us the model of youy player )
Notice by reinitialising your player ALL the music and other media will be erased !!!!!
Hi Meggleton313, If you needed to photocopy a couple of pages (side by side) from say a magazine or book. You would lay the magazine on the glass, opened on the 2 pages you want. You could use center erase to remove the area where the spine of the magazine would be. Thus avoiding the dark and blurred image traditionally associated with copying this kind of media. Kind regards m-press.biz
To solve the error E91-01 error, Please follow the instructions given below:-
Turn the camera OFF
Remove the battery or the power supply
Turn the switch to CAMERA for about 30 sec
Turn the switch to OFF
Install the battery or power supply
Turn the switch to MEMORY
Open the LCD cover and press the RESET button ( small inner button )
You will be prompt to adjust date/time. Do it
Now Take some pictures
Error will be removed, If still occur, Perform the above steps once more, after it if still error prompts then it means that service is required by authorized service and they should change the flash unit, In this case go to authorized SONY Cameras service provider, Your problem will be solved.
I hope this solution helps you If you have any more Confusion, questions or issue regarding your problem do inform me.
Thank you for using FixYa!
SC542 A Fusing temperature warm-up error
The fusing temperature does not reach the standby temperature within 20 seconds after the main switch is turned on.
• Fusing thermistor defective or out of position
• Fusing lamp open
• Fusing thermostat open
• Power supply board defective
• Poor connection of the fusing unit
turn power off the on to get printer to start initialising, as soon as it starts to move away from the home position turn off power again. Ther carriage can now be moved by hand. When you have checked your cartridge reconnect the power and allow the printer to reinitialise.
Usually this occurs due to hardware failure, in this case a semi full reset could be tried and if that doesn't work you may further try a partial reset.
Here'show you do it:
unplug the power cable from the back of the printer. press and hold # and 3 on the front panel button and then replug it,wait until the printer reinitialises. .
for further clarifications ,revert back on this page.
It looks like your Mac is writing data back to the card while connected. The camera tries to access the images, but sees the Mac file, and doesn't know what to do. Try accessing the images on the Mac while the camera is connected. If you see files that are not the camera's files or folders, delete them. Don't delete your image files and folders, however.
×