Audio Players & Recorders Logo

Related Topics:

Question about Panasonic sa-ht930 Home Theater Audio System SA-HT930 System

1 Answer

Sa-100bt i have an f76 error after taking unit apart i have found that there is a black wire next to where the fan plugs in this wire has been disconected does any one know where it goes thanks

Posted by Anonymous on

Ad

1 Answer

Steve K

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Panasonic Master
  • 1,054 Answers

Usually that is just to wrap around the fan cable to make sure it doesn't go into the fan. F76 error can be either the fan is not turning, or the amp is bad.

Posted on Apr 16, 2013

Ad

1 Related Answer

ravichetty

RAVI CHETTY

  • 158 Answers

SOURCE: fault code for sa ht 17

Hi,F76 is the error displayed when the fan goes faulty in the unit.

Posted on Aug 19, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a panasonic SC PT960 system. Haven't used in months. Turned on,got error code F76. Tried unplugging and plugging back in to reset, but it did not work. What is wrong with my system?

"F76" is a power supply problem. Could be something really simple or something much harder to figure out. These units aren't really user serviceable and it's way too old to still be in warranty(?) so maybe you've been whapped with a subtle hint to upgrade to a blu-ray HT system. You'd be able to keep the rest of the system and just replace the head unit.
1helpful
3answers

Panasonic sa-pt770 will not power on

When power is applied do you get any LED light or display that shows?
0helpful
1answer

Getting a f76 code on model # ncc-199 sv

F76 is usually a communication error between the remote and the heater. you may have just unplugged something inside the unit while it had power (don't do that). Just unplug the unit from the wall (or flip the breaker) and wait 10 sec and plug it back in again and the problem should fix itself. Otherwise there my be a loose wire going to your remote. In which case, try unplugging the remote and unit for 10 sec and plug the unit (only) back in with the remote disconnected. run your hot water and see if it works. if so it could be a problem with the remote or its wiring.
0helpful
1answer

I have an old Panasonic SA-HT40 surround sound system. When the unit is powered on the error message "F76" shows on the display and then the unit shuts off immediately. The user manual instructs to un

I have the same problem with my Panasonic model SAHT-40. I get the same code plus popping and shortly reads maximum overload then cuts off. I disassembled my unit and discovered that my fan fails 2 work causing the unit it over heat. I called Panasonic 2 place an order 4 a cooling fan. This model is obsolete they dont even manufacture parts 4 this unit anymore. The closest that I can get with my credit card is Samsung model AH31-00056B cooling fan through Panasonic. I hope that this solution helps all of u out with ur unit!
0helpful
1answer

WHAT DOES THE ERROR MESSAGE F76 MEAN?

1/ check overheat stat 2/ check fan esp the little hose at the fan area for pinhole best of luck
9helpful
2answers

Fault code for sa ht 17

Hi,F76 is the error displayed when the fan goes faulty in the unit.
53helpful
12answers

Magic Chef MCWC44DZ E4 error

I found the connectors corroded for both fans. The lower fan connector had one pin that was completely destroyed. I hard wired the wires together as a test and the unit is working perfect. Check the fan connectors by removing the two screws that hold the shelf in place and cafefully slide out fron the cooler. You will have to disconnect several connectors hidden in the right side of the shelf before you can completely remove it. Good Luck.
10helpful
6answers

Error Code "F76"

spoke to a friend at an authorized servicer and he said he has never heard of that code but from what yourm describing its eather the outputs the speakers or the power supply Oh and a sevice manual is availiable at the partstore.com or from the panasonic web site as I've been there. good luck
Not finding what you are looking for?

798 views

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5750 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...