Portforwarding on Linksys WAG200G wireless modem/router

TURN OFF MODEM, ROUTER, AND PC FOR ONE MINUTE. THEN TURN ON MODEM...ROUTER...AND PC IN THAT ORDER

When you enter your credentials check the box that says save my credentials.

First unplug your router, then unplug your modem and for 10 seconds. Next plug the modem back in and wait it to reboot(on mine this a series of 4 lights that light up in sequence, when the 4th light stops flashing, reboot is complete). Finally plug your router back in.

What you have to do is ,first covert the modem into bridge mode, then configure the router in pppoe modem by having internet username and password from ISP .. that will resolve your problem

OK the main problem right now that the only data carrier in Saudi Arabia (STC) is upgrading its infrastructure to provide high bandwidth to end users. STC is using Huawei MSAN which doesn't support linksys.

Here is a firmware update which they say it will overcome some of your problems.

Mirror1
Mirror2 - rapidshare.com
Mirror3 - Google Groups


here is the link for the original article in Arabic

Hi akemccarthy

you may need to open the ports for the linksys Router aswell
because the linksys links the belkin to the internet there using a shared connection

once youve fowarded the ports properly check to see if you have enabled the UPNP on both of the routers if they have any

heres a website showing how to port forward the ports you need opening
http://portforward.com/routers.htm

Can you please tell me whats the current Wireless Mode? have you perform reset?

This web page has a wonderful graphic step by step to use port forward for your linksys router:

http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/default.htm

Hope this helps.

hello sir iam working for voip and iam a tech?
and u r using linksys pap2 which is not a router its just a phone adapter so it will work through a router so try this first
is ur modem is a modem router and u have 4 ether net port on it and u can able to access inter net through hard wired and connect this pap 2 adapter through one of the ether net jack on the modem router (ut starcom)>an dit has a fire wall which block ur voice signals so u need to open some ports on it try this link to open all ports and u need to try this with a pc which connected through hard wired on the modem router go to through this link
http://www.portforward.com/english/routers/port_forwarding/UTStarcom/UT-300R2U/Vonage.htm

and also disable the fire wall on the router screen and reboot the linksys pap2 and ur ut star com modem router also and connect ur phone directly to phone jack 1 on the pap 2 device if u have any issues let me know
and rate me solved if its helps thx

Go to this page: http://www.portforward.com/routers.htm Find your router on this list and it will give you a detailed description on how to port forward.