Pairing my headset

Hi terantra,

I would like to assist you with your Motorola H700 headset, Please see steps below.

• Make sure that there are no other Bluetooth devices in the area.
• Now set the device that you want your Motorola H700 to pair with make sure that it is detecting devices.
• Now on your H700 Motorola press and Hold down the Multifunction Button on it, and open the mouth piece.
• This should be detected right away by the device that you are pairing the with the H700, the pairing Code for this H700 will "0000"

I hope that his will be of help regarding your concern.

Have a nice day,

mvincent

Hi,

Did you try deleting all devices paired and then try pairing again?

when pairing a handsfree device to your phone the typicaly generic passcode is 4 zero's (0000)

You will need to enter pairing mode on your device. The H700 User Manual indicates that you do so by first turning off any previously paired device and opening the headset BOOM. The indicator light should light a steady purple while in pairing mode.

You may not need to turn off your phone if you do not desire this, you may be able to get by turning the blue tooth function off and on, on your phone and attempt to pair again.

Pairing Pin is likely 0000.

try to power cycle the cellphone by turning it off and remove battery, then reinstall and turn it back on


For headset pairing

How to pair the phone with a Bluetooth™ headset The phone identifies and maintains up to 16 devices which are displayed in a list. To add a new device or pair a headset via bluetooth, turn Bluetooth™ on in both devices.

1. Put headset in pairing mode. See Headset User Guide for more information, if needed.
2. Turn on Bluetooth in your phone, Go to menu, [SETTINGS] > [CONNECTIVITY] > [BLUETOOTH] and press "Select"
3. Choose [TURN ON] , press "Select"
4. Choose [MY DEVICES], press "Select"
5. Choose [NEW DEVICE], press "Select"
6. Choose the headset to be paired and press ' Select '
7. Enter the pass key '0000', press "Ok"

Link for headset setting, just choose the headset model

http://www.sonyericsson.com/cws/support/products/pairinginstructions/w300i?cc=us&lc=en

If you are using a different device the just set the Bluetooth to on on it as well

After your phone has found the H700 you have to tell your phone to pair with it. It will then ask for the code. Punch in 0000 and confirm. After a little bit the H700 will flash blue several times rapidly and then start blinking about every 5 or 6 seconds. It is then paired with your phone.

narrow down possibilities
with h700 in off position you held down the center button till it turned pink then opened the mic so that it stayed pink?

told the phone to add new device?

made sure that bluetooth is turned on under settings?

i just got a h700 myself and it was very easy to sync.

i have a samsung r410 and have the same problem.... im thinkin its the phone....

Thank you. I called a 1-800 number for tech support but they told me I had to wait 14 days from the date of purchase before they could help me. Your suggestion was right on the money. Thank you.

Is the Samsung bluetooth turned on?