Programming should be done from the M7310, M7324 or the T7316E set.
Administration access code: Feature * * 2 3 6 4 6 which also is Feature * * A D M I N. If asked for a password enter the same 2 3 6 4 6.
If that doesn't work you may have the newer Compact ICS or the Modulur 0x32 control unit wish will be Feature * * 8 4 6 3 which is T I M E. Password is 2 2 7 4 2 which is B A S I C or A D M I N which is 2 3 6 4 6.
When in programming just press the (next) button until you see what you want to change. Then press (show),then (change) if you want to change it. If you pass it, just press (back)
Example: To change the Time & Date Press (next) until you see Time & Date. Then (show) Then (change) Then (change) again, change it if you need to, Then (next) again until you see what you need to change. For example; only the hour needs to be changed for day light savings time. Just press (next) until you come to the (Hour). Then Change it. Then press release (RLs) when your done.
To get out of programming, just press the release button (RLs).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you misplaced your Nortel M7324 Telephone User Card Manual?
Would you like a digital, searchable, pdf version of the Nortel M7324 Telephone User Card Guide? Follow this link (& click FREE) to download a pdf version of the Nortel M7324 Telephone User Card manual.
Have you misplaced your Nortel Meridian 1 Administration Manual?
Would you like a digital, searchable, pdf version of the Nortel Meridian 1 Administration Guide? Follow this link (& click FREE) to download a pdf version of the Nortel Meridian 1 Administration manual.
In tech programming (Config) you need to got to the Line data and remove lines 2, 3, 4, 5 and 6 from the pool it is in, make it none. Note if line 1 is in use then you cannot call out. Note sure why you would want line 1 as your outbound, systems are to use the bottom lines out and work their way up and inbound starts at the top and works their way down.
If you dont know how to program or the password call your local vendor in for a 1 hour charge.
If there is some strange reason then state what the setup or issue is and we can see if there is a work around.
There is another way, do a FEATURE * * 2 6 6 3 4 4
Password is ADMIN (23646)
Then you will need the template:
You should see TERMINALS&SETS:
Press the Enter
SHOW SET:___ enter the extension
Press the Enter
Keep hitting NEXT till the name shows up and press change
Type in the new name
and press NEXT to save the change
Hit RLS to exit programming
1. Press the Rls button then ** FEATURE 266344 (CONFIG)
2. Password is 23646 (ADMIN) The display reads Terminals & Sets
3. Press SHOW ans enter the Extension for which you want to enter a name.
4. Press SHOW, again
5. Press the NEXT key until the display reads NAMES at the top left corner.
6. The bottom right corner reads CHANGE, press the far right soft key.
7. To move from one letter to the next use the far right and far left soft keys or the # key.
8. When you are finished Press next.
9. Press the HEADING key to get back to TERMINALS & SETS and start again!
Navigation Keys: Line 1 = HEADING Speed Dial = SHOW
Line 2 = BACK Last No. = NEXT
This can only be done from the main handset and only one at a time. The Soft Keys are the three small buttons right bellow the screen.