For broken glass top replacement, speak to one of Miele's in store professionals to organise a spare part. You can also view Miele product parts online and alternatively call a product specialist (https://shop.miele.co.nz).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Miele cooktop induction KM 6350, 6380, 6382, 6383 dE mode
How to switch off demonstration mode
Press ‘power’ button on front and ‘lock’ bottom at same time until you get p5 mode displaying ( it is in programming) mode.
Then press top left to ‘0’, bottom left panel to ‘0’, then press right bottom panel to 9, then press on ‘power’ button to save. This should take it off demonstration mode.
Bummer deal! While that code response is not known by me, sometimes when a heat sensor fails, or a wire loses contact, the computer gives a code. Be care wiggling any live wires as a weak or broken wire will spark brilliantly. That spark may end the problem - or indicate that part is needed. A sensor sends signal to turn off or on the flow of electricity to control heat levels. When they fail, or a wire closes connection the computer does not know what to do, so it says, "Da," check this thing out, giving the code you see. Pursuing the checks stated will show which problem you have. Hope this works - as those sensors on electric rangers and ovens, wires, and sometime a wire break on the top, or plug-in point for elements are big trouble makers.
PS: Some knobs have a sensor in them that can fail. Of course an appliance person will check each point and may have the code interpetation.. A Tech visit cost about $75 for an estimate.
I looked up your cooktop and discovered it to be made by Frigidaire.
Hence & therefore, try the website "searspartsdirect" and see of they will give you schematics to buy the parts for your needs.
God bless your efforts.
ENr is on rating plate on bottom of hob. The Ceramic top is easy to replace, it is held on by 3 pozi screws on each side (12 altogether) and just sits on the main electrical parts, obviously the unit should be isolated from main before you remove the top. Part can be ordered using the link http://www.bosch-home.co.uk/store/spareparts/search