Question about Televison & Video

1 Answer

Red flashing light on tv. Power went out at home and can't get tv working. Unplugged it from the wall and then tried into a different plug from an extension lead. Green light and sound comes on, no picture then quickly turns off and back to a flashing red light??

Posted by Dannie Giandinoto on

Ad

1 Answer

ERNEST GANT JR

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

Red flashing light on tv. Power went out

Posted on Apr 19, 2013

Ad

5 Related Answers

nemesis10

Roberto Lecaro

  • 4 Answers

SOURCE: funai 32 inch plasma tv

http://www.tvrepairdoctor.com

Posted on Nov 24, 2012

Ad

Jaime Hernandez

  • 2337 Answers

SOURCE: Blinking red light

It appears in all cases that the power supply needs to be service. The blinking light might indicate that there are shorted parts or the voltage is low or a combination of both.
The solution at this point would be to get the power supply repair since new boards are not longer being manufactured. In about 95% of the time if the LCD doesn't power up or turns OFF by itself or need to be unplug for some time to make work again; those are the symptoms of a dying or defective power supply.
I service these power supplies, for more info write to [email protected]

Posted on Nov 27, 2008

Anonymous

  • 7 Answers

SOURCE: tv wont turn on

TV STARTS UP AND GOES BLANK SOUND NO PICTURE

Posted on Aug 31, 2009

Raditronic

Radames Pagan

  • 196 Answers

SOURCE: AKAI 32" Power Malfunction

check all 1000mf-16v & 470mf-16v in power supply. may be blow.

Posted on May 06, 2010

Anonymous

  • 1099 Answers

SOURCE: LG TV won't turn on. Power light flashes red/green.

Hello,

Power supply board just die.It can be dead at anytime.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.


Posted on May 31, 2010

Testimonial: "good advice"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
3answers

What does the light flashing on a sunbeam electric blamket controller mean and why wont the blanket heat up

The flashing red light is designed to notify you in the event that
a problem has been discovered by flashing the light on the base unit.

Before resetting the unit. First, check the blanket/mattress
pad for visual damage.
If no visual damage is found, unplug the system from wall outlet.
Check that the base unit is well connected to the module. Plug the power cord into the wall outlet. Set the base unit to "On." If the system still does not operate after two or three times trying to reset, disconnect the power cord and get it checked out by a specialist!
Nov 02, 2014 • Home
0helpful
2answers

Plasma TV-power light does not come on

have you tried a completely different wall socket altogther/
1helpful
1answer
0helpful
1answer

TV won't turn on power light flashes 10 times

Switch off the TV from remote, then switch off the on/off button on the TV, remove the plug pin from the power outlet. Cool off for 48 hours and then retry. If nothing works, better refer it to a qualified service technician.
0helpful
1answer

Hi, My name is Anali and I recently purchased a Westinghouse TV from Target. I had it plugged into the wall and working one evening. The next day when I went to turn it on again the red button would...

Hi Anali. That sounds like the powersupply is bad. The tv has a one year manufactuers warranty. Take it back to Target and exchange for another one. Hope this helps.
0helpful
1answer

My panasonic rear projection TV turns off

this just happened to us, we tried the reset button, didn't work. we unplugged from surge protector and plugged the tv in the regular wall socket and after a few minutes the green light quit and we were able to turn tv on
0helpful
1answer

Toshiba tz43v61 TV just died. No red light.

does it have a power strip on the tv stand? if so plug the tv into a wall socket.my power strip went bad and the reset button did not work
5helpful
2answers

LG LCD TV Standby Light Flashing Red Continuously

I have had this same problem twice in the past 3 months. So far both times I've been able to get it back after a week or two. I'm not sure what works, but unplugging and detaching the antenna and cable and waiting a few days seems to be the key. In both instances, I unplugged it for a few days then plugged it in for a few days and repeated the processes until I eventually got the steady red led. Both times prior to the red led the led would flash red then green and make a clickiing noise for several hours before I was able to get it working again.
2helpful
2answers

LC 32D43U power and OPC green light flashing set does not come on

hey i have had the same problem but i unplugged the tv for awhile about a half hour and then plug your tv into a different wall outlet if you can and should work. It worked for me, i had it plugged into a surge protector then i unplugged it from there, let it sit of half hour then plugged into different wall outlet and worked. so try that and see if it works.
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

3,134 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6394 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...