We do not have a manual and can't get it set up.

Reset digital timers before programming to eliminate trace testing memories and restore full functionality

Make sure you're in correct mode fro programming: Time setting mode, with selector moved to top next to clock symbol

Compare your timer manual with Hagar manufacturer's generic manual for the 2-channel: English on page 3.
http://waterheatertimer.org/pdf/Hagar-monotron-200-2-channel-manual.pdf
http://www.credaheating.co.uk/assets/kb/operating_instructions/0/Flash_2S_Programmer_Instructions_Issue_1.pdf

Contact Creda
www.creda.heating.co.uk

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Sorry but I don't have the workshop manual but there's a small 'trick' you could use - works on most carbs. There should be a screw/bolt/grub screw on the carb body that sets the flow of gas in the carb. That's the thing you want to tweak. Start the strimmer (making sure it clamped securely) and set it at any speed, preferably a low speed but any will do as long as it's steady. Then start turning the screw/bolt slowly clockwise and counterclockwise and you'll notice the revs going up or down. Find the sweet spot where it's fastest and that should be very close to the ideal fuel setting.

I bought a cheap digital humidistat at Walmart to keep an eye on the humidity in my basement. I hung it on the wall not too near my dehumidifier. I have found that the settings on the dehumidifier are misleading, but I found a setting that keeps my humidity between 40% and 55% (at around 70 degrees), as measured by the humidistat.

http://www.futuresecuritysystems.com/resources/pdfs/abacus-user-manual-6p-6abi-8p-15-72.pdf

Hello
Get into this site. you can download the user manual to your ILive from here. You can get details about how to set clock from this user manual. If you feel any difficulty in downloading the manual, contact me by Fixya comment box. I've the downloaded user manual to your set, and I'll send a copy of it to you by return mail. OK.

Hello
Enter the setup menu to show th setup window. Select the 'Installation' IN this window you can see the 'Control Panel Lock' option. If it is set to ON, may be now, set it "OFF". The control panel lock will be released. For more details, go to the page [37] of its user manual. If you haven't the manual with you now, send your email address to me by Fixya comment. I've the downloaded manual with me, and I'll send a copy of it to you by return mail. OK.

You don't have to remember. The manual...

http://www.retrevo.com/support/Panasonic-RX-ES30-CD-Players-manual/id/312dj593/t/2/

The manual is available here: http://www.sharkclean.com/manual/KC271B_REV_0804B.pdf . The high and low settings are more like those of a microwave rather than a direct temperature setting. On high, the slow cooker uses full power (35 watts). On low it uses 1/2 power.

I hope this helps.

Cindy Wells
(In one place it says 34 watts. In another it's 340 watts.)

do a google search for kd=hdr30 manual, i did it brought up your owners manual its in pdf so youll need adobe to read it

From owner manual:

• If Lock is already set, enter the password as requested.
• The TV is set up with the initial password "0-0-0-0".

• If you ever forget your password,

key in '7', '7', '7', '7' on

the remote control. Then, the

password reset to '7', '7', '7',
'7'.

You should download the user manual: www.retrevo.com