My pics for I. beat emo

Hei, i just solved it by plugging it to my computer, then running the firmware updater which you can download from here: http://www.trekstor.de/en/products/detail_mp3.php?pid=78 Select topic(mp3) product (i.beat emo) and language. Download the drivers and tools and if you want to watch videos the transcoder. Install it and run it. Update the firmware and tick the option "Format data drive" and hopefully it helped, cause it did for me. :)

Hi

please intall the driver update of your unit to back in to original settings

Thanks!

start i.beat and then press alt/space to see menu

Does it come with a CR ROM

Just turn on your trekstor, go to fm radio.
Then wait for the program to respond.
After that, there will be a button on top of the power button, press it once.
It will open up a menu showing US Band, and EU Band. Select either and press scan.
Wait for the scan to complete, then enjoy your radio.

make sure your music is in mp3 format, use windows media player to sync.

Try this , plug in usb cord into the emo, simultaneously push the small reset button at the lower right corner under the power button , if that doesnt work here's the link for the xp drivers

http://www.trekstor.de/downloads/produkte/i-beat_emo/driver-tools-win-all_i-beat_emo_v2-620-013_all.zip
(copy and paste )

hope this helps :)

The video may be glitched or the memory is full. Try unlocking the unit by pressing the reset button with a paperclip. It's located just below the on/off switch on the right side.

Emo can only be charged by your computers usb 2.0 port. Independent chargers did not appear to work. I was manager and owner of a computer business. The independent USB Universal Serial Bus 2.0 chargers might work but the emo recognizes the computer and navigates to the charge screen when charging but when using an USB charger (less than $10) the emo won't go to that screen however there is no evidence that it isn't charging.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard