Programming is done on 7310, 7324 and 7316 type sets.Enter
programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say NAME.
press the show key (top right arrow)..
The name can be a maximum of 7 characters
Press the next key (bottom right arrow)when finished entering name. Press the release key when finished
×