Purple Screen My camera turns on, but the display screen is purple. It flashes and snaps to take pictures, but the picture doesn't come out, only a purple screen. Please help. I have a new Panasonic Lumix DMC FZ28 camera and it seemed to have just died. I was taking a picture and it stopped, the screen turned purplish with thick lines. I tried turning it off and on, but it went dead. any ideas? it's 2 mos old

If the LCD displays correctly on previous photos then the problem is more than likely a CCD or associated ribbon connector failure due to moisture/condensation or age/misuse. Good luck with finding a replacement part!

This is known problem of bad ccd imager chip in Canon A75 camera and ccd imager will be replaced to get correct live view image.

Canon offers free of cost repair for A75 camera for bad ccd imager problem, click Canon CCD Imager Advisory for details.
Thanks.

Please reset the Camera to the default settings to resolve this issue.
To reset the Camera, please click the Menu button, then select Setup1 and select Initialize and click OK.

You can refer to the User Guide of the Camera from the below link.

http://www.docs.sony.com/release/DSCW30-W40-W50-W70.pdf

Please refer to the page # 53.

Regards,
Prashanth

Hello,
It is bad ccd issue in Canon A95 camera and ccd imager needs to be replaced.

Canon will repair A95 free of cost as per announced scheme.

Click Canon CCD Advisory for details.

Good luck.

when downloading the pictures,good?.
then lcdconnecties are broken.

A loose connection perhaps
A gentle taspe may restore it - or it may not.
Canon support will advise on your next move

Your CCD imager is broken...

Hello tonyj111, If your old pictures look fine on the display, then the problem is related to the ccd sensor itself. The purple color is displayed because of a problem in the signal transmision from the ccd sensor to the camera's main processor. This is done using 3 channels one for each primary color (RGB red green blue). If the connector to the sensor is broken, or got out of place (loose) because some mechanic shock or symilar, the data processing woun't come out right. It is purple because your camera's processor mess up blue and red signals therefore resulting same purple instead of blue or red colours. In order to fix this you will need to either send the camera to a service center to have those connections checked (if your camera is still in warranty you will want to do this) or ask me for further instructions if you wish to try to dissasemble the camera yourself. In either way the problem is fixable and in most probabilities a cheap fix will work. Good luck

This is a CCD sensor problem and should be replaced. Try to have it done free of charge by Sony even though your camera is an old model because CCD sensor should last 10 years +.

your camera CCD is gone just replace it near your servive centre https://www.google.co.in/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0ahUKEwjw5aHq67_UAhUKuo8KHSMoDFEQjRwIBw&url=http%3A%2F%2Fwww.ebay.com%2Fitm%2FSAMSUNG-PL100-CCD-SENSOR-FOR-REPLACEMENT-REPAIR-PART-%2F261071736686&psig=AFQjCNGNxusI0WektQaSxFc7lgATrkPq2w&ust=1497615818313040