I have a SOYO 26" TV. It will not allow my to change the input display. It is stuck on AV2. I need to switch it to PC as it is also used as a monitor in the spare bedroom. Any advice would be appreciated. I have tried a hard boot, but shooting it and putting it out of my misery has been a thought. LOL It is a good TV and everything else seems to work excellent, I just can't get it to switch between input devices.
An expert who has achieved level 3 by getting 1000 points
The main board is having an issue thats why the inputs wont switch.
Posted on Apr 05, 2013
Is there anything that I could try doing other than replacing the main board? I am asking out of desperation. I don't really use it much and don't really want to put much or any money into it if I don't have to. It is in the guest room but part of the hosue network. Without it they don't have movies, TV or music, just DVD. Is there an external box on the market that I could hook everything up to and run through the one input on the TV?
some cable boxes have AV outputs that should work other than that a Roku box streams movies but you need a internet connection for that also some dvd players have netflix and Roku built in. Hope that helps.
×
SOURCE: remote codes
Then you go by the UL listing code and search online to see what other manufacturers make it.
C-Dog
Posted on Feb 10, 2008
SOURCE: My Soyo DYLT032 has power but no picture or sound
Long story short:
Had the same problem with my Soyo.
Thought it was the power supply board problem that everyone else was reporting.
ordered one. Plugged it in. Did not work.
Inspected the Main/Logic board and found what looked like a black button that could be depressed. It is located to the right of main processor on the board. You can't really miss it.
With the TV plugged in, I pressed the suspect button. The TV made a buzzing/clicking noise for a few moments and the stuck blue illuminated power button faded away.
Curious by this, I pressed the power button and low and behold the TV comes to life!
Looks like I found a "reset" button which seems to have fixed my problem.
Thanks Soyo for not bothering to mention that such a button exists.
I hope the rest of you have the same good luck. In the event you are still in need of a power supply board, email me. I have a spare now it seems. ;)
Posted on Jan 20, 2009
SOURCE: bell express vu remote codes for soyo tv
1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record
Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .
Posted on Feb 25, 2009
SOURCE: My Soyo DYLT032 has power but no picture or sound
I HAVE FOUND 2 2200uf CAPS ON THE POWER SUPPLY BOARD THAT ARE PUFFED UP. CHANGING THEM USUALLY SOLVES THE PROBLEM. THERE'S ALSO A RESET BUTTON ON THE MAIN BOARD YOU MAY NEED TO RESET AFTER CHANGING THE CAPS.
Posted on Jun 30, 2009
SOURCE: i need to find out the codes to use on a direct tv
soyo tv remote code is 00000
Posted on Nov 08, 2009
Sep 15, 2016 | Soyo Televison & Video
Jun 01, 2014 | Daewoo DTQ-27U4SC 27" TV
Nov 22, 2012 | Samsung LE26R73BDX 26 in. HD-Ready LCD...
Jun 11, 2011 | Televison & Video
Apr 22, 2011 | Memorex MLTD2622 26 in. LCD TV
Nov 17, 2009 | LG 42PX5D 42 in. Plasma HDTV
Jun 29, 2009 | Soyo 19" LCD Flat Panel Monitor
Mar 20, 2009 | Sanyo DS13204 TV
Feb 02, 2009 | Philips 34PW9817 34" TV
Mar 05, 2017 | Lasonic DVDP | DVD-7050 5.1CH
640 people viewed this question
Usually answered in minutes!
×