Question about Hitachi 61UWX10B 61" Rear Projection Television

1 Answer

My color doesn't line up on my hitachi 61UWX10B somebody said color mod is bad

Posted by Brennan Estopinal on

Ad

1 Answer

Sonny Berry

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 8,617 Answers

Replace the convergence ICs you need two STK392-110 convergence ICs You can get replacement ICs at the folowing link with free isntallation instructions.
http://servicemanuals.vstore.ca/

Posted on Mar 06, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The convergence is off on my Hitachi 61UWX10B rear projection TV. I was unabel to fix it using the remote

The chips and 12 resistors need to be replaced, below is a link where you can find them. I've done business with them. They're very reasonable and give you step by step instructions to fix it yourself.




http://www.tvrepairkits.com/xcart/product.php?productid=20080&cat=1647&page=1
0helpful
1answer
0helpful
1answer

Hitachi 61uwx10b needs more convergance work than magic focus can apply. Options for savvy DIY'er ?

Know basic soldering?That all require changing convergence ICS all it resistors.Tries Tv repair World.com,Tvrepairkits.com for the convergence kit.
0helpful
2answers

COLOR SHADING

Sounds like a bad convergence circuit, unless you know how to use a meter and solder well you will need to call a reapir man. This repair should run you anywhere from $300-$500 depending on your area and the tech that comes out. If you were to do it yourself it would run less than $100. Please let me know if you need more info or would like to try it yourself.

Tim
[email protected]
0helpful
1answer

Hitachi 61UWX10B 61 in | TV will not turn on after reset | any reset button inside the TV ?

My Hitachi was doing the same thing. The culprit is a bad or intermittent 5V relay on the power supply board.
0helpful
1answer

Double image 6 your old unit

KIT10 $29.50
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes 2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
0helpful
1answer

Convergence Problem

http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
replace convergence ic
0helpful
1answer

Hitachi rear projection "61UWX10B

I was told may be problem with high voltage capacitor. not true. 1 your problem in power supply. 2 if it is ok it is due to horl.section.
0helpful
1answer

Hitachi Projection 61UWX10B

Does your set have Magic Focus, if so then you can adjust manually. And when Convergence is acceptable, press Move to write data to ROM memory. Rom Write? is displayed to alarm system that ROM will be over written with new data, Press the Move button again to write displayed data to ROM. Data Write will take 20 sec. aand no picture will be displayed Green dot will be displayed when operation is complete. Press Mute to returen to converg. pattern, then confirm again converg. is acceptable. Press MOVE(ROM WRITE) mode, then press PIP ch to initialize sensor dat positions.
Not finding what you are looking for?
Hitachi 61UWX10B 61" Rear Projection Television Logo

Related Topics:

143 views

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76708 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6307 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...