Question about Pride Mobility Products Used Jazzy 1120/2000 Electric Wheelchair

1 Answer

I have a Jazzy 1120 When I turn it on all the battery lights flash rapidly any suggestions

Posted by David Williams on

Ad

1 Answer

Tigre Noir

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 317 Answers

How many are flashing? There are 10 lights, if all are flashing (3 red, 4 yellow, 3 green) that indicates Code 10 and high battery voltage.

Posted on May 20, 2013

Ad

5 Related Answers

oregoon

  • 175 Answers

SOURCE: have jazzy select series need to know flashing Code #9

Consult your owners manual for the flash code guide. I believe that you probably have a PG Drives Joysitck/Controller, in which case a 9 code would indicate problem with the brake system. Check the free-wheel levers by placing them in the neutral position, and then firmly placing them back in drive. Try to restart. If still flashing, you need to remove the seat and the shroud and examine the connections inside the base of the chair. The brakes are at the end of the motor, and there are thin wires coming from them back to the controller box. Inspect these wires for any damage, and follow them back to make sure any connections on the way are tight, and that the connections for all clip connections are tight.

The brake is electrically operated by a solenoid. If the solenoid has gone bad, then this will also cause a fault code. Contact your dealer for servicing this part. Good Luck.

Posted on Jul 09, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Wiring Diagram Pride Jazzy 1120

mso 9]> Normal 0 false false false MicrosoftInternetExplorer4 mso 9]> mso 10]> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} There are two levers just under the seat at the front. Pull the forward and to right to lock position, which will release the gear so that the wheelchair can be move about without any electric power. Bear in mind though that releases the gear, still too heavy to push as normal wheelchair. Give a go, to find out for yourself.

Posted on Aug 28, 2009

Anonymous

  • 29 Answers

SOURCE: jazzy jet 3

Look in your owners manual for the flash code anwser. Make sure when you hit the power button you only touch it for 1 sec not more. If you press the power button for more the 2-3 seconds you place the power chair in LOCK OUT mode. lights will flash and not power. also check your free wheel levers. one on each moter. Mike

Posted on Sep 07, 2009

lennieg2000

  • 692 Answers

SOURCE: my hand controler on my

GAdams You need to count the number of flashes. The number of flashes will give you the flash code or error code. IE: 3 flashes pause 3 flashes pause etc. = left motor short If you have your owners manual it should list the flash codes and what they mean for your chair. If not you can contact Pride Mobility @ 1-800-800-8586 and ask for Tech Support. If medicare paid for your chair the they will pay most of the repair cost. Contact the provider where you got your chair to see if they can repair it or refer you to a service Company that can. Hope this helps

Posted on Oct 08, 2010

lennieg2000

  • 692 Answers

SOURCE: pride jazzy quantum 1420. working fine until

Could be in sleep mode try pressing the on/off button twice to get out of sleep mode if that doesn't work then you have a joystick problem and it needs to be replaced Hope this helps

Posted on Mar 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jazzy 1170xl plus won't move. When I power it on the lights come on like there supposed to but as soon as I move the joystick the battery level lights start to flash rapidly. 9 of the 10 lights...


Code 9: brake fault. Check motor connections and make sure that the levers are in the engaged position - if you can roll the chair the gearbox is not engaged.

Apr 29, 2013 | Pride Mobility Products Jazzy 1170 XL Plus

1 Answer

Jazzy 1120


"Cuts out" is not enough info. Check all connections for tightness, full battery and light codes.

Apr 29, 2013 | Pride Mobility Products Used Jazzy...

1 Answer

Jazzy 600 plugged into outlet. speed level lights flashes like its charging. will not move while plugged in. battery charge meter not increasing.


Hello.Visit -www.alldatasheet.com its free.Download a troubleshooter as a PDF File of your product.Save + print if you choose to your Adobe Reader.Merry Xmas,any problem,please ask again Colin.

Dec 16, 2010 | Pride Mobility Products Used Jazzy...

1 Answer

I have a Jazzy 14 xl when plugged in the charger shows full charge and every thing lights up but when u unplug the charger it has no power


same thing as the other fellows problem Batteries!! the charger is supplying the power to light up the joystick but when not plugged in the batteries are so low they can't turn your chair on. Replace both batteries good luck Hope this helps

Oct 30, 2010 | Pride Mobility Products Used Jazzy...

1 Answer

My hand controler on my jazzy 1120 2000 keeps blink and I can not get the chair to move the batteries are good


GAdams You need to count the number of flashes. The number of flashes will give you the flash code or error code. IE: 3 flashes pause 3 flashes pause etc. = left motor short If you have your owners manual it should list the flash codes and what they mean for your chair. If not you can contact Pride Mobility @ 1-800-800-8586 and ask for Tech Support. If medicare paid for your chair the they will pay most of the repair cost. Contact the provider where you got your chair to see if they can repair it or refer you to a service Company that can. Hope this helps

Oct 05, 2010 | Pride Mobility Products Used Jazzy...

1 Answer

Jazzy battery lights will not light and the car will not move.


check there is power in the batteries, if so check all wiring for breaks loose fittings, fuse trip switch etc, failing that it may well be the controller, hope it is not that as they are not cheap.

Jun 20, 2010 | Pride Mobility Products Used Jazzy...

Not finding what you are looking for?
Pride Mobility Products Used Jazzy 1120/2000 Electric Wheelchair Logo

514 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Mobility Products Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeff Bird

Level 3 Expert

1346 Answers

Are you a Pride Mobility Products Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...