Conditon paper out zebra gx430t - Zebra 105Se Thermal Printer

It appears to be a well documented issue. Try the Zebra Support Forum.

https://www.google.com/search?q=zebra+gx430T+wont+calibrate

..

Do a factory reset on the printer.

Check you printer driver settings if you are printing using it.

this is because printer calibrates every time u power on, this is a default setting, and its good if u using diferent labels all the time. you can change the settings thought driver,and change (when power on - "doing nothing" dont forguet to reboot Thanks Paulo.

Run a cleaning card thru the printer

assuming that is is a printer scanner unit ( models mean nothing with out make and type) you will have to download the drivers for it from the manufacturers web site for that particular machine

http://www.scanonline.com/pdf/PrintersZebra4/GX420t/ProductDocumentation/980612-001A_GX420tUGen.pdf Here is the manual it will tel you how to go about resetting the Ip address on this printer, If its connect to your RJ45 cable or you have a print server you will need to reset it using other means but this should set you on the path to help here, thanks please do not forget to leave a rating.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

ihave 945 audio drivers . but no sound

Paper uspide down? Check the communication parameters in the printer setup.

if you are not using a ribbon you should configure your printer properties in direct thermal the same with your printer configuration in LCD Panel, if your printer properties is different with the LCD Panel error condition ribbon out will come out to your LCD Panel