Furuno NavNet  vx2 1920C GPS Receiver Logo

Related Topics:

A
Anonymous Posted on Mar 31, 2013

How do you brighten up furuno navnet vx2 - Furuno NavNet vx2 1920C GPS Receiver

4 Related Answers

Anonymous

  • 84 Answers
  • Posted on Jul 29, 2008

SOURCE: Furuno Navnet vx2

http://www.furunousa.com/Furuno/Rooms/DisplayPages/LayoutInitial?Container=com.webridge.entity.Entity%5BOID%5B55569A8B8619E148AE7923E9133AF845%5D%5D

Ad
TechnoMarine

John Barry

  • 132 Answers
  • Posted on Jan 13, 2010

SOURCE: My furuno navnet vx2 periodically freezes during

Reinstall the operating software. The unit should probably go to Furuno.
Try operating it with only a GPS connected (no radar, no network). If this resolves it, it is almost certainly software. It could be low voltage or failing mother board.

TechnoMarine

John Barry

  • 132 Answers
  • Posted on Jul 06, 2010

SOURCE: how do i connect my furuno navnet vx2 to my vhf

the output is on the black (blue) and white wires. in system setup, portsetup, you can select which sentences it sends out. 847-746-0100

Anonymous

  • 1940 Answers
  • Posted on Jun 23, 2011

SOURCE: Hi admin I have a furuno navnet vx2 GD1920C-BB

The Navnet VX2 1920C includes the BBW GPS/WAAS receiver antenna and show highly accurate position data on your choice of C-Map NT MAX or Navionics Gold+ Cartography. This device fully supports C-Map NT MAX and Navionics Gold Chart SD Cards.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I remove the "toolbar" from the top of the screen on my furuno NavNet Vx2?

go to toolbar with controller, and push clear key. just it.. but when you restart your system, it appears again. if you wanna lose it anytime, you must do it inside the General Setup.

thanks..
0helpful
3answers

Ais and 1920c Furuno chart plotter

n the system setup, under “UNITS” I set BEARING to “MAG” (magnetic). This will cause the unit to display course / bearing information in relation to the Magnetic North and match magnetic compass readings. It is not the same as True North! One has to be careful with this setting. There are a number of areas where the earth's magnetic field is locally disturbed, sometimes very significantly. Your GPS may not account for it. - again, under “UNITS” I set “METRIC”.

0helpful
1answer

I have a Furuno Radome RSB0094-075 with a Navnet RDP 139 10.4" What I dont have is the antenna cable to connect the two units. What cable should i be ordering for this?? Thanks, Mike

That is a Furuno 1823C Radar -000-138-972 (10 meter Radar cable) $150.00 msrp from Furuno. Give their Camas Office a call or your nearest dealership. The Furuno number in Camas, Wa 888-834-9330
0helpful
1answer

I want to do a master re-set on a Furuno Navnet 2 , 1944 radar/plotter. Do you know the sequence of keys? Andy

Press and hold the alarm key whilst powering up. Also try it with the clear key while powering up again.
0helpful
1answer

How do i connect my furuno navnet vx2 to my vhf radio. i have a 6 pin nmea cable for the vx2. but i do not unerstand which wire to use.

the output is on the black (blue) and white wires. in system setup, portsetup, you can select which sentences it sends out. 847-746-0100
1helpful
1answer

My furuno navnet vx2 periodically freezes during operation and must be restarted. Any suggestions?

Reinstall the operating software. The unit should probably go to Furuno.
Try operating it with only a GPS connected (no radar, no network). If this resolves it, it is almost certainly software. It could be low voltage or failing mother board.
0helpful
1answer

Need owners manual for furuno navnet vx2 1834c

easy one, download here
http://www.furunousa.com/Products/ManualList.aspx?category=Products+%3a+NavNet+vx2+%3a+Radar+%2f+Chart+Plotters

0helpful
1answer

I can not seem to get a simrad ap 20 to recognize the nmea connection from the navnet vx2

you will have to designate which sentences to send to the AP20 from the navnet under port options. also make sure the AP20 is set to read the correct port to accept the information such as gps1 or 2 or nav1 or nav2
0helpful
1answer

Software

Buy it from a Furuno dealer like me The product is MaxSea NavNet version John Barry 847-746-0100
Not finding what you are looking for?

56 views

Ask a Question

Usually answered in minutes!

Top Furuno GPS Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Furuno GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...