Unlock code for DVD player

Hack to Unlock Durabrand DVD Players Region Code

Mydigitallife.net https://www.mydigitallife.net > hack-to-unlock-durabr...
Dec 24, 2006 - Hack to Unlock Durabrand DVD Players Region Code · Turn on the DVD player. · Press Setup. · Go to "Preferences". · Press Play. · Enter 2 - 5 - 1 - 5 ...

Check current region code
Open the Philips HOME Screen
Type on your remote: 8520
This will display all of the current settings for your player.
Example: Region_Code: DVD(2) BD(B)Change region code
Turn on player with no disk inserted
Press "Open/Close" on the remote control until the tray is open
Press 8689310 - 0 means all region
Press 8689311 - 1 means region 1,
Press 8689312 - 2 means region 2,
Press 8689313 - 3 means region 3,
Press 8689314 - 4 means region 4,
Press 8689315 - 5 means region 5,
Press 8689316 - 6 means region 6.
Now the front Buttons might not work!
Go to SETUP and click on RESET FACTORY SETTINGS
Wait until the player restarts and now you can play all DVD regions

You maybe able to get a region free code for your player from one of theses WEB sites.
Unlock DVD Players - Region Free Code
www.dvdexploder.com/ www.download-info.com/dvd/index_new.htm

DVD players have 5 regions. And on the back of every DVD you buy the region code is marked in side a circle ( like a globe ).
Region 1 is North America
Region 2 is Europe . Middle East & South Africa
Region 3 is South East Asia,
Region 4 is South America, Mexico, Australia
Region 5 is India , USSR, Africa.
To change the region code of your Lifestyle 38 DVD player follow the steps given below.
Make sure you familiarize yourself with the buttons on the remote and not fumble while keying in the sequence given below.
Make sure there is no disc in the tray of the player and it is closed ( tray ).

First step - Press RIGHT arrow, UP arrow, SHUFFLE, STOP, MUTE

To change to a specific region code
Step two --- Open the disc tray
Step three --Press STOP
Step four --- Press SHUFFLE
Step five ---. Press # key for desired region from the list given above.
Step six ---- Press ENTER.
Turn off the DVD player wait for a 10 seconds and restart. It should work.
Enjoy your foreign DVD's. Cheers!!.

Hi,
Do the following step to make your DVD player region free..

1.Turn machine on without disc inside
2.Press menu button
3.Enter region code (See below for list)
4.A highlighted 'region area number' will appear in the upper left corner (some players)
5.Press 9 to change the region number to multi-regional
6.Turn DVD off (remove power from mains)

next time when u power on the DVD ,it will be region free.

region 1 - 29334
2 - 38767 or, 5 7 5 3 8
3 - 56732
4 - 76884
5 - 53814
6 - 24462
ok

New DVD-ROM drives come with a firmware level RPC-2 with hardware protection. RPC 2 drives have a 5 change limit on regions, once the counter gets to 0 your drive is permanently locked to the last region it was set to. Even if you reformat or move the drive to another system it will still be locked to the last region. There are ways to get around it, some models have resetting tools made by 3rd parties to reset the change limit back to 5 and some also have firmware patches to remove the region lock.

The first solution is free VideoLAN player: click here to download VideoLAN. 

The second solution is free Remote Selector tool: click here to download Remote Selector. Launch remselec22.exe file. Click Control tab. Choose Enabled, and check all options Region Free, Disable Macrovision, Disable User Prohibition Click Start Player button, and try to play your DVD

Finally Load another firmware for your DVD drive which disables the region code protection.

Alright, just follow these steps and let me know if you have any problems or questions

1. Power and switch on the Durabrand DVD player.
2. Open the DVD disc tray tray or lid.
3. Press Stop.
4. Press 3 - 5 - 9 - 7 (3597 in sequence). Can be done on remote control.
5. Hidden DVD Region menu appears. Select region 0 or 9 using up or down button on remote control
6. Press OK.
7. Close the disc tray and press Standby on the DVD player front

1. Turn on dvd player
2. Open the tray
3. Press 0000 in the Remote Controller
4. Change to any region you want (0 for region free)
5. Press Pause to confirm your change
6. Turn off
7. Turn on again and enjoy

i fund this by dargan and it worked for me "Def" Camino Real 3, Panama:
Region code hack posted by dargan, August 23 2008:
Same hack for DVD283 worked for DVD-277

<clipped from other post>
Region code hack posted by mhardial, January 25 2008:
DVD Regional Codes
Code Location
**1** USA (incl. territories), Canada
2 Europe (Germany), Japan, South Africa
3 Southeast Asia
4 Latin America, Australia, New Zealand
5 Russia, rest of Asia and Africa
6 China
0, 255, 9 MULTI REGION


Region Code Change


NOTE: Make sure you DO NOT have a disk in the tray while performing the region code procedure

DVD Players


New DVD283
1. Open DVD Tray
2. Press the “Menu” button
3. Press 8888
4. Press the “Display” button
5. Region Code Number shows up. Use the numeric keypad to select your region code number (0 – 6).
6. Press the “Setup” button to exit.