Sanyo Xacti HD1010 won't power on after using wrong charge chord.
I accidently used the wrong charge chord to plug in my camera dock. I noticed that the red "charging" light came on and started blinking instead of staying on. I unplugged the 9v charge chord and plugged in the correct 3.5v charge chord and now my camera wont turn on at all. Whether I plug the correct chord into the docking station or the camera itself, the camera will not power on. My concern is that I either fried the battery, the camera, or both. I would assume that sanyo engineered in a reset or something. Is there a way to reset the camera.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the recharageable battery is more than 3 - 4 years old then the battery could be worn out.Rechargeable batteries have a finite number of charge and discharge cycles andwill lose their charge capacity over time, i.e. won't charge to 100% andgradually the charge reduces until the battery won't charge up at all. OR Thebattery shows a 100% charge but when the adapter is disconnected the batterydrops off to zero capacity in a very short time. If the battery drops to anunacceptable charge level then the battery needs to be replaced.
your camera problem isn't clear but sound like shutter unit does not initializing. I don't think you can save. It is not simple job for if the shutter problem then local repair shop would charge you $65 to 135 mostly.
good luck with you
On my HD Tv, I have to press the "Input" button on the remote - and that displays a list on the screen.... Aux, TV, PC, Game, HDMI. Find the equvalent button on your TV Remote and select the HDMI port as the "Input" and you should be good to go.
I connected my Sanyo VPC - 603 digital camera to an AC/DC adaptor due to battery malfunctions. After about 5 seconds, i heard a spark sound and the camera went off. What might have gone wrong? How can it be repaired?
This sounds like the same problem my daughter has with her camera (same model). Have sent it away to be repaired and have been told it needs a new MAIN PCB. The total cost is £232.65 !!! We are still looking around to see if we can get it done cheeper !