I have a sanyo-hdtv 42in.model# DP42746, the wall which it was plugged into popped a breaker and now my tv wont come back on after I flipped the breaker.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tries websites like Amazon.com,Ebay.com to buy a new wall mount bracket set for holding tvs 42-50 inches.Should work fine LCD tvs or Plasma tvs used the same wall mount bracket set.
I have a Sanyo DP42746 model, 42". From my research I believe the lines in the picture are letting you know your Buffer Board is about to go out. Mine recently cut out, and it caused horizontal lines to appear. Hope this helps : /
This is why I recommend buying the extended warranty. The repair would cost about $300-400. It is most likely the power supply, you could replace it yourself, but the parts are very hard to find.
please never purchase anything with the name sanyo on it again my tv does the same thing now i spent 1500 dollars to have to buy another, should have put that money on a new sony!!!!!!!!! never again i'll tell everyone about these pieces of ****!!!!!!!!!!!!!!!1
The buffers are attached to the Y main, on the left side of the board. Samsung, sanyo, several others all have the same boards. As long as they are the right part # just go for the best price. Check www.shopjimmy.com for used boards.
×