Lg 8013 flashing lights

This is a 'front end loader'.

https://www.google.com/search?q=front+end+loader

Google

LG (model number) light flashing

No idea what you mean by

drying light flashing in the cooling light to stainless

and I have been reading the question since yesterday!

..

well..seems to me that your digital device is hiccupping radically, and that you may need to have the internal memory flashed by a qualified service professional

Alexander, this is what I found check the links
Turn on player
-Open tray
-Type 7-7-7-7 (4 times "7") on the remote control
-A menu appears on the TV screen, with the various regions (0-6). The current Region setting is highlighted (for me it was 2)
-Select Region 0
-Save setting by pressing the "setup" button on the remote
-Ready
The region code will not be restored to the original value when the player is turned off!
PRESS THE HELPFUL BUTTON
http://www.videohelp.com/dvdhacks/schneider-sdv-436/8013

http://bbja.xyz/dvdplayers/schneider-sdv-436/8013#comments

Hi there Rohan,

Fixya does not provide product keys or activation codes for any software application including Adobe Flash. Using "free" licenses acquired on the internet is software piracy and that is illegal. I would highly recommend that you purchase a genuine Adobe Flash license for your own use.

It sounds like you have a faulty interlock. This is what locks the door during the wash cycle.Sometimes they won't unlock and need to be replaced. There may be a pull tab inside the pump access area at floor level to get door open....Not a big job for a tech......Nomess

call a tech and have them replace the flyback transfomer along with the ic 8001 and transistors 8013 an 14

go and buy a universal learning remote and you will be able to program all your devices on the remote, works very nice. as far as the lg remote, dont think there is a way where u can program your cable and dvd onto the remote and I have lots of experiences with LG

sory I didnt see the model number in on the other page. It is telling you a problem in power supply. I think yo might need to look at Q 8013 Q 8014 R 8051 Im looking at a model different model so or it could be listed as IC 8002 I dont have the same model in front of me to look at right now in my books the resistor will be real low in value 0.1 ohm usley will go open or not read on meter. Be sure to unplug tv before you open it up and look around.

no, the mp3 player has done been corrupted. you might as well tell the person that you was gunna fix it for that he/she needs to buy anouther 1.

The inner spring cable is a tough part to put back on without a special tool.  You're best bet is to remove the front cover of the washer to try and reinstall the seal.  If it doesn't work, you will need to call a qualified LG technician to help you.