- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To reset and re-pair your Explorer 230 follow the instructions on
this link for the Plantronics Explorer 230 User's Guide, especially
pages 4, 5 and 7.
Once you make your phone discoverable, then put the Plantronics 230 headset into pairing
mode by pressing the call control button until it flashes red and
blue. The passkey code is " 0000 " (four zeros). Here is a link for the pairing instructions:
The pass code should be 0000 (four zeros), it's always been that for
Plantronics headsets. Here are a couple of things to try. First,
remember that newer phones are like small computers, so they may
become corrupt over time and you may need to reset them every so often.
Simply turn your phone off and remove again the battery for a few
seconds, then replace the battery and turn it back on again. Second, you
want to reset the headset. The link below to the user's guide for the Plantronics
Explorer 230 on page 7 will show you how to turn off / on the headset
and page 4 will walk you through the pairing process. Remember to
remove any previous bluetooth connections from your phone.
The pass code should be 0000 (four zeros), it's always been that for
Plantronics headsets. Here are a couple of things to try. First,
remember that newer phones are like small computers, so they may
become corrupt over time and you may need to reset them every so often.
Simply turn your phone off and remove again the battery for a few
seconds, then replace the battery and turn it back on again. Second, you
want to reset the headset. The attached user guide for the Plantronics
Explorer 230 on page 7 will show you how to turn off / on the headset
and page 4 will walk you through the pairing process. Remember to
remove any previous bluetooth connections from your phone.
powercycle both phone and headset.
turn on phone only.
turn on its bluetooth!
no turn on headset
on phone, search for headset
it should see it
now pair... type like 0000
it should pair... if not, then the headset needs a special code... see its manual for the pairing code
×