Several problems, please help

In case you need support from outside (remote location) for fine tuning you tenors just provide me the IP Address and Password via mail and, or chat; contact me as bdheeman (at) gmail (dot) com.

http://www.dtt.tw/catalog/1917.html#desc3

Hi

For making/reciving SIP calls with A800 u need its SIP firmware.
u can add me on MSN for more help.

MSN : [email protected]

U can use Console access.
What u need is Hyperterminal + rs232 cable to access A800 via Console.


Hyperterminal can found on all Win OS : Programs > Accessories > Communications

for more help add me on MSN as :MSN:[email protected]

plz help me my quintum problam FAS SOLUTION WHIT PIC

[email protected]

its a 5 volts dc u can use a computer power supply

the software you put is corrupted.. try to delete the flash memory nd install a new one.. but be sure you have a license file befire you do a recovery..

there is a solution on your problem that already post on this forum.. try to search it..

Command line for termination A800 (Quantum)



Config unit 1# online 1

Config sys# mindn 10

Config sys# maxdn 20

Config pstntg 1# pass 0

Config pstntg 1# cassig 6

Config pstntg 1# super 3

Config pstntg 1# lamp 1 country code (91)

Config pstntg 1# Answerdel 120

Config pstntg 1# lamp 1 9101 01

Config pstntg 1# dis 1 a (ALL - ports)

Config pstntg 1# ena 1 a (ALL – ports)

Config gkadmin allow 1# ip xxx.xxx.xxx.xxx (GW ip + switch-ip)

Config dsp# voice 81 (for g723) voice 68 for (G729)

Config# submit




Local information

Name of this zone Hello
Country selection Canada
Local country code country code (91)
International prefix country code (91)

Hop-off PBX Numbers

91 public

9101 01 public

This configuration for termenation

try to set factory