AEG OKO_LAVAMAT 74620 gave me a code error C7. What is it?

Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Hello!

Error C1 on AEG Lavamat usually means that there is a trouble with water filling. The required water level is not reached.

I reccomend you contact your local Service
Force Centre.

Here is the link to a manual of a similar AEG Lavamat waching machine (a "trouble shooting" part). Hopefully, it will help!
http://manualsbrain.com/ru/manuals/1793433/?page=30

http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3299-aeg-lavamat-error-codes-8-series-on.html

Write your answer...oko-lavamat 76630 update
motor error////E40

C7 error is th\at no heating of the water has happened. check the heater (most likeley) also can be faulty relay on electronic. ntc fault, pressure switch or wiring to any of them.

error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate

Hello, to cancel the error C9 try to reset the machine by holding the start Button whilst turning the dial through 360 (from Off-2-Off).
Thanks

Hi,

C9 Indicates Motor Fault. It seems that the Carbon Brushes have Worn out.

Replace it and more likely it would Fix the Problem.Once you replace that, you need to put the machine into Service Mode to Reset the Error.

Steps for Reset the Error Code

1. Press and Hold the Prewash and Soaking Buttons Together.
2. Whilst Holding them, Turn the Dial from Off one Click Anti Clockwise

Note - If problem persists, Check the motor plug for broken wires and check the state of the carbon brushes.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.

Replace Water distributor (Dispenser Drawer) then will be Ok

Rafiq