Kenmore elite 72163663300 code p100 - Kenmore 63662 / 63664 / 63669 Microwave Oven

https://homeguides.sfgate.com/cuisinart-bread-maker-error-codes-13409633.html


Error code ERROR 1 presents on Kenmore Elite countertop microwaves with model numbers 56561582011, 16755, 56561584011 or 56561589011. ERROR 1 occurs when the unit has not received enough power to undertake a sensor cooking operation. Sensor cooking is a feature of Kenmore Elite microwaves that adjusts the temperature and cook time of dishes contingent upon information received by sensors in the microwave. In order to perform this function, a microwave must be plugged into a power source for at least five minutes previous to doing so. Thus, ERROR 1 indicates that the unit has not been plugged in for a sufficient length of time.

it's the touchpad, you have to stick a new one, call a technician or buy the touchpad corresponding to your microwave oven model

https://www.applianceblog.com/mainforums/threads/51787-Kenmore-Elite-SE-error-code

I Believe this model has an options button with codes by numbers which are 1 thru 6 I believe. Either 1 or 2 are sound. So hit the options button and hit the number 1 it should say (sound), Then you will hit 1 again a.k.a. mute, and no more beep beep beep. If 1 is not sound then you may have accidently created a small but deadly emp, so hit stop and you must hit options and then hit 2.

Owner Manual
Manual Kenmore Elite Microwave hood combo 72186013010

That's a problem with the inverter or another high voltage part.

The F-9 error code indicates a defective control board, inverter or line voltage too high.
Read more: http://wiki.answers.com/Q/What_does_the_code_F-9_mean_on_a_Kenmore_Elite_Microwave_oven#ixzz1FMSrTmbU


Hope that answers your question and it won't be too expensive.
Check on ebay for prices.

f7 keeps showing up and the microwave keeps cutting off,f7 code shows up. what do i do

My Kenmore Elite Microwave Model No. 721.64683300 does not seem to be heating well and will shut off and flash an F9 code. What does the F9 code mean

Unplug the unit for 1 minute to clear the ECU.
re-plug, and re-try.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Please reply back with your model number so we can help you.

A full Sears/Kenmore model number usually has 3 digits, a dot, then 8 more digits, such as ###.########