On tru9480 how do i record my message? - Uniden 5.8GHz Expandable Cordless Phone System with Digital Answering System

Page 61 from the Base Unit, there is Delete All. From the handset you have to delete 1 at a time.

With.the.phone.in.standby, .press.[ ].to.
delete.all.messages..When.the.answering machine asks you to confirm, press [ ].delete again..All messages are.
permanently.deleted.

https://www.manualslib.com/manual/184807/Uniden-Tru9480-Series.html?page=61#manual

..

Follow the instructions on page 51 of the manual at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/TRU9480om.pdf

Are you trying to get the messages from the phone directly or by calling into your phone.

If the answering system is on, then you can play back the messages from the base by pressing the Play/Stop button.To delete a message from the base, press the Delete button (has a 0 with a slash through it) while the message is playing. To delete all messages, press the Delete button when the phone is in standby. From the handset press the Messages softkey (has an envelope icon) when the phone is in standby. Then press Play/2 to play back the messages. To delete a message, press Delete/4 while it is playing. (Deleting all messages can only be done at the base.)

If you are calling into your phone system, you need to have set a two-digit PIN from either the base or the handset and remember it. Then call the number for your phone from a touch tone phone, press 0 and then the PIN within 2 seconds. (Do this while your greeting is playing or after a series of beeps when the phone answers your call after 10 rings if the answering system was off.) If the system is off, start by pressing 0 6 to turn it on. Press 0 2 to play back the messages. (All commands need to be entered within 15 seconds of the last command finishing with both keys pressed within 2 seconds.) To delete a message, press 0 4.

Uniden has the manuals for most of their phones on their support site: http://www.uniden.com/scat/cordlessphones_mnl . Phones are listed in numerical and alphabetical order; thus the TRU9480 manual is on page 7. The direct link to the TRU9480 is http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/TRU9480om.pdf .

I hope this helps.

Cindy Wells

just change the settings on your call forwarding settings, every model have it's own unique configuaration or setting, refer to the manuals

in the base there is a button named messages...just press it and it will lead to the message inbox...or in the handset,from menu select messages...

The answering machine is full, delete messages

The answering machine is full, delete the messages.

Same manual as lethean but Page 24 if the previously used Base is Unavailable and your phone shows "Deregistration" in the Menu.

Base Unavailable (Handset Only)
To clear the base registration data in the handset, please follow these steps:
Press and hold "Hang up"and [#] for more than 5 seconds. Select the BASE UNAVAILABLE submenu.
BASE UNAVAILABLE appears. Move the cursor to select YES, and then press the OK soft key.
ARE YOU SURE? appears. Move the cursor to select YES. Press the OK soft key.

Here is the manual.

As far as the transferring calls on a secondary line, use the flash button.

Unfortunately, I do not believe that you can get messages back at all once they have been deleted.  There's no "Recycle Bin" on phones.  I've had this happen to me before, and it was about a job interview, none-the-less.  Sorry.