Canon faxphone L80 will not recieve fax

Here is a link to Canon for your FaxPhone L80 Users Guide. Reference page 14-3 to access the menus, page 14-5 for report settings, and 14-6 for TX Settings
http://gdlp01.c-wss.com/gds/0300000539/FAXPHONE_L80_Users_Guide_EN.pdf

Describe 'Lots of noise'.....was it static? Or high pitched varying tones (also known as handshake) Normally the two beeps are after the 'handshake tones' which means that the fax is awaiting an answer from sending machine. If you don't mind, email me your fax number so that I can hear exactly what you are hearing. [email protected]

Page 9 in this setup guide to program fax recieve mode for your Canon Faxphone L80.
http://gdlp01.c-wss.com/gds/0300000537/FAXPHONE_L80_Set-Up_Instructions_EN.pdf

have it hooked to phone only . can not figure out how to hook it up phone keep ringing when you answer the phone and it's not a fax

Most of my fax mahines I setup,I setup with the fax only mode,and then I change my incomming ring to 7.This give you enough time to answer the phone and minnimize the risk of losing faxes.If a external phone is connected to the phone and you receive a fax call,you press 25 on the external phone and the fax switch to rceive.

Hello sir; Try to make a copy on this machine, if copy coming out good that's means the problem happen on remoted side.

Here is the manual


http://www.retrevo.com/support/Canon-L80-Multifunction-Printers-manual/id/1304dj681/t/2/

help needed for the cannon l80

it makes it a lot easier if you change everything and know it's good for years.

here is the manual

http://www.usa.canon.com/app/pdf/copier/L80_SoftwareGuide.pdf

Not too familar with this model but make sure the recieve mode is in fax mode only or automatic.