Pdp 117p compaq not starting - Televison & Video

Are you asking or telling me?

I would say no and parts are very unlikely to even be available for it due to its age.

Test your PSU or replace it if your power supply units fan is not working your PSU is faulty

Any luck with this? I really need this information as well.

Here's a list of Pioneer plasmas using the PDP-R05U media receiver:
PDP-4345HD, PDP-4350HD, PDP-4351HD, PDP-5045HD, PDP-5050HD, PDP-5051HD

sir go to the link elektroda.pl
1 open the supply,
2 check the ac voltage upto rectifire a
3 check the further dc voltage after the bridge rectifire


for
1 see if the ac is going upto rectifire
if not then remove the fuse that is covered with tape or if there is a resistance fuse , then take it out and replace

remember to change the fuse with similar value
2. if dc is formed,
check the filters and the diacs and diods in post sm transformer circuit



else write me again

if u solve the problem then thank me else send me internal picture

you power supply may be faulty or, or you motherboard, even try to update the bois

I do not know how to solve your issue sorry, I need the media centre you have for a PDP435. Would you like to sell the media receiver PDP-05G ?
0212624139

all what can i do is to give u this amazing article its me who wrote it, well u can benefit from my researches

http://compreviews.about.com/od/tutorials/ss/DIYPSU.htm

Here is a solution from the Pioneer web site:

http://www.pioneerelectronics.com/PUSA/Support/Important%3A+Updated+Information+Regarding+Free+Power+Supply+Replacement+for+Certain+Pioneer+Plasmas
Important: Updated Information Regarding Free Power Supply Replacement for Certain Pioneer Plasmas Pioneer is continuing to offer a free, in-home/office power supply replacement for certain of its second and third generation plasma models listed below for customers who experience a problem with the original power supply. If a model is not listed below, no power supply replacement is needed and no further action needs to be taken.
If you own or use a plasma listed below, please call our toll free hotline at 1-800-421-1404 to arrange a time to have your plasma's power supply upgraded at your residence or office at no charge.
Plasma Models (15 listed):

• PDP-505HD
• PDP-503PU
• PDP-5030HD
• PDP-5031HD
• PDP-433PU
• PDP-4300
• PDP-4310
• PDP-4330HD
• PRO-800HD
• PRO-800HDI
• PRO-1000HD
• PRO-1000HDI
• PDP-433CMX
• PDP-502MX
• PDP-503CMX

The issue with the power supply in the plasmas listed above does not pose any health or safety risk. Pioneer has received reports that the power supply in the affected models may fail. In some cases, a loud popping sound can be heard when a power supply fails. After the power supply fails, the plasma is no longer operable.

Anyone with questions can call Pioneer's toll free hotline at 800-421-1404.
We apologize for any inconvenience.