Question about Fisher Paykel EcoSmart GWL15

1 Answer

Aquasmart lid lid wont lock

Posted by tracey paton on

Ad

1 Answer

Greg Stephen

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fisher Expert
  • 566 Answers

Is the lid lock tang on lid broken.
2.9 Lid Lock
The Phase 7 Washer uses the same lid lock that is used on
the Phase 6 series 11 & 12 machines. The difference being is that the lid is now locked for the entire cycle. When the lid is locked the Lid Locked LED will illuminate. Once the spin
has completed, the lock will release and the lid can be
opened. To open the lid during the cycle the
START/PAUSE button must be pressed, the machine will
come to a halt, and the lid locked LED will extinguish.
If the lid is left open, the machine will be unable to lock the lid
and the cycle will be halted. The machine will play a tune
and the lid lock will flash until the lid is closed and START/PAUSE is pressed.
• If the lid-lock fails in the closed position, the locked lid can be forced upwards and out of the
lock. Note: This is the only time in which we would recommend doing this.
• If the harness is damaged, the complete lid lock assembly will need to be replaced.
If the power supply is cut during the spin cycle, the machine will keep the lid locked until the rotor has ceased to turn (3 to 10 secs). Only then will it release the lock. The motor is acting like a generator and allows the lock to stay energized under the bowls inertia.

Posted on Dec 14, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lid wont lock


Most likely lid lock needs replacing

Nov 05, 2017 | Washing Machines

1 Answer

Display says "lid" and machine won't start


May be the lid switch is faulty. There would be switch which confirm the Door is closed. If the switch is fault the the lid lock will not get activated and the the machine wont run. Try to find the switch and replace it. If you bypass it then you wont be able to close the door because the the lid lock will get activated before you close it.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Aug 31, 2016 | Washing Machines

2 Answers

How to start clean me cycle ?


Switch to Powdered Detergent and you wont have to clean your washer. Liquids leave a smelly, corrosive residue on the inside of the machine, use only Powder and leave the lid up when not in use to defeat the slime!

Apr 25, 2016 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Lid locked light on, will not release


The lid lock light won't stop blinking. - Fixya

www.fixya.com/.../t14714916-lid_lock_light_won_39_t_stop_blinking
Oct 21, 2012 - The lid locked keeps blinking and I can not start a cycle. - WhirlpoolLSB6200KQ Top Load Washer question. ... Whirpool cabrio wtw5500xw top loadwasher will not start lid light flashes then goes out and into flashing pause ...

Whirlpool washing machine_ lock light flashing_ nothing ...

? 1:53
www.youtube.com/watch?v=zrV9w6Z5LAU
Mar 3, 2012 - Uploaded by briantaylor62 Whirlpool washer wont start a cycle, lid does lock and the locklight ... a cabrio as well that just has the lid lock flashing and nothing happens , I ...

Flashing Lid Lock Light: How to Troubleshoot Errors on Your ...

? 1:23
www.youtube.com/watch?v=nttHsAX2_OM
Mar 27, 2015 - Uploaded by searspartsdirect
The lid lock light on VMW washers, made by Whirlpool, Kenmore and Maytag, will flash whenever there is a ...

Oct 12, 2015 | Washing Machines

1 Answer

WL80T65CW1. Why is it displaying fault 234 and will not cycle?


Replace just the lid lock assembly to start with and see how it goes. Lids are quite expensive and don't usually need replacing. You can always get a lid later if you still have problems.

Aug 25, 2015 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Why has our washer stopped working through a cycle and why wont it turn on again


The most common problem with AquaSmart is the pump.
The pump has gone bad and blown the motor controller board.
Some AquaSmart machines display the wrong Error code (49)
witch is not the correct code for this problem.
Pump and motor controller board need replacing.
Maybe cheaper to buy a good secondhand machine.

May 18, 2014 | Fisher and Paykel Aquasmart wl80t65c

1 Answer

Amana washer lid lock wont quit blinking


Your washer lid lock button is locked and lid was not put down before it locked, which is why the light is flashing. Therefore, push the "START" button until you see the lid lock button is off (Approx 3 seconds). Once it is off, then you can put the lid down and push the start button again, which will lock the lid into place. The washer will NOT drain or wash or spin unless the lid itself is in the locked position. If you were able to get the lid down and locked and it still doesn't work, then you need a technician to replace a wiring harness. However, you mentioned that the lid lock button was flashing, therefore, it stands to reason that your lid is NOT locked down.

Apr 13, 2014 | Amana NTW4700YQ Top Load Washer NTW4700YQ

Not finding what you are looking for?
Fisher Paykel EcoSmart GWL15 Logo

329 views

Ask a Question

Usually answered in minutes!

Top Fisher Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Brad Brown

Level 3 Expert

18666 Answers

Mike

Level 3 Expert

4376 Answers

Are you a Fisher Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...